lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-10-2012, 11:35 PM   #1
Not Yet Wild
Club Car
 
Join Date: Jun 2012
Location: Fishers, IN
Posts: 44
Default Light Kit-Switch

Hey Guys,

I bought a Club Car light kit for my Precedent. It came with a push/pull-on/off switch for the front and back lights.

I was planning on using this switch,

http://www.autozone.com/autozone/acc...er=412560_0_0_

to turn the lights on and off.

The push/pull that came with the kit only has 2 wires connected with it. The switch that I plan on using has 3 spots for connection (+,-, and ground)

Will I be able to use the switch I bought and if so, how?
Balmo130 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-10-2012, 11:48 PM   #2
Gone Wild
 
sms-shop's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Gastonia NC
Posts: 530
Default Re: Light Kit-Switch

Sure you can use it ... Remember one thing .. That all grounds have to go back to the negative post of the battery ... Never ground to the cart frame .

Pin #1 goes to the ground (-)
Pin #2 goes to the lights
Pin #3 goes to the 12 volt power source (+)
sms-shop is offline   Reply With Quote
Unread 08-11-2012, 12:25 AM   #3
Not Yet Wild
Club Car
 
Join Date: Jun 2012
Location: Fishers, IN
Posts: 44
Default Re: Light Kit-Switch

But the original switch is connected to the harness and attached to all the wiring to the harness of the cart. The original on/off switch only has two wires connects to it. Do u know if they are +,-, or ground?
Balmo130 is offline   Reply With Quote
Unread 08-11-2012, 12:42 AM   #4
Gone Wild
 
sms-shop's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Gastonia NC
Posts: 530
Default Re: Light Kit-Switch

The switch you got with your lights has no lumination with it (small light on switch) that's why it does not have the third spade connection for a ground ... You still bring power in to the switch from the power source (12+) on 1 spade and send the power to the lighs on the other spade . Run all the grounds to the (12-) post.
sms-shop is offline   Reply With Quote
Unread 08-11-2012, 08:27 AM   #5
Not Yet Wild
Club Car
 
Join Date: Jun 2012
Location: Fishers, IN
Posts: 44
Default Re: Light Kit-Switch

SMS,

Thanks for the help. So the top pin will go to the ground (-), middle will go to lights and the bottom connects to the hot (+).

So, I will need to get a volt meter and see which of the 2 wires on the original push/pull switch is the hot wire.
Balmo130 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Brake light switch Electric Club Car
Brake light switch Electric Club Car
Brake light switch Electric Club Car
Brake light switch Gas Yamaha


All times are GMT -5. The time now is 01:36 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.