08-27-2012, 09:18 PM | #1 |
Not Yet Wild
Join Date: Jul 2012
Posts: 45
|
1998 Front Hubs
Ok I just ordered a front hub kit for my 1998 club car elect. My question is what the poo do I do with it. Ive got two bearing i can tell one goes in each end (greased I assume) then there is a ring that I can tell goes in the back side and should be flush to the opening. However I then have a dust cap yet it looked like my old one had a washer up against the ball bearing I assume where the spindle came through and had a nut with the locking pin through it? Someone have some light they can shed on my dark mind. Thanks for all your help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-27-2012, 09:25 PM | #2 |
Getting Wild
Join Date: Apr 2012
Location: Marion, Ar
Posts: 91
|
Re: 1998 Front Hubs
Yea u have the right idea. Pack.your bearings with.grease, put them in the hub and pop ur seal in the.back of the hub. Slide it on the spindle, u may or may not have a washer that goes on end of spindle. Then put ur nut on and tighten it up. Make sure it lines up with the holes to put the pin thru it. Make sure ut spins.with ease. If so put ur dust cap on.
|
08-27-2012, 10:04 PM | #3 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 1998 Front Hubs
I'm assuming you're missing the nut and the cotter pin? They're not included in the hub kit.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
where can I find ezgo 5 lug front hubs? | Golf Carts and Parts | |||
Which is stronger CC or Ezgo front hubs? | Design Center | |||
looking for two 84' g1 front hubs | Gas Yamaha | |||
2005 Front Hubs, where to get them? | Electric Club Car | |||
G1 front hubs | Gas Yamaha |