lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-01-2012, 07:50 AM   #21
Gone Wild
Club Car
 
Join Date: Mar 2012
Location: Cullman, AL/Destin, FL
Posts: 273
Default Re: Help with 12v to 8v conversion wiring

I'm assuming if I change the blue and orange on the controller that would be the same as switching posts on the motor? When I switch blue and orange. It runs forward with buzzer sounding. Then I switched the wires on the F/R switch. Then it goes backwards with buzzer sounding, but still no forward (no solenoid kicking in). Orange wire is in the center of the F/R switch.
nobogez42 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-02-2012, 11:03 AM   #22
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,981
Default Re: Help with 12v to 8v conversion wiring

Starting to sound like a bad F&R switch.. Make a jumper wire. Jump the orange to the blue for reverse, orange to the brown for forward. If it works both ways, replace switch.
TahoeDawgZ71 is offline   Reply With Quote
Unread 09-02-2012, 01:56 PM   #23
Gone Wild
Club Car
 
Join Date: Mar 2012
Location: Cullman, AL/Destin, FL
Posts: 273
Default Re: Help with 12v to 8v conversion wiring

Ding Ding Ding!!!! We have a winner!

Great call TahoeDawg. It was the F/R switch. Used the jumper and it works great. I did have to switch my Orange and Blue wires on the motor since it was running forward with the buzzer on. That stands to reason since when I installed my Plum Quick motor last spring I had to reverse the blue and orange wires from their original positions to make it run correctly.

Thanks a bunch TahoeDawg! You saved me a pile of fretting over this thing

Where should I order the F/R switch from?
nobogez42 is offline   Reply With Quote
Unread 09-02-2012, 05:32 PM   #24
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,981
Default Re: Help with 12v to 8v conversion wiring

A site sponsor or a dealership. They're cheap. Glad it worked out for ya buddy. You can try and take it apart and see if you can see the problem. They have prongs on them that pop loose to allow you to disassemble it. It's a very simple design internally and you should be able to figure out how it works by looking at it. Sometimes the little rocker inside it will fall out of place.
TahoeDawgZ71 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Controller wiring/DCS fnr switch wiring Electric EZGO
ds conversion 4(12) to 6(8) Electric Club Car
Please HELP!!! Need wiring diagram for V-Glide to Solid State conversion Electric Club Car
Wiring lights and a winch? Use a converter or hard wiring? Electric EZGO
Wiring lights and a winch? Use a converter or hard wiring? Electric EZGO


All times are GMT -5. The time now is 02:06 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.