lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-29-2012, 09:52 PM   #1
Not Yet Wild
 
Clemsonprecedent's Avatar
Club Car
 
Join Date: Aug 2012
Location: Mount Pleasant, SC
Posts: 54
Default Will IQ controller reset after removing wires?

I have an 09 precedent I2 (IQ) with 6-8volt batteries. I have a stock controller (that I assume is a Curtis 250 amp) and it is sett to the 4th speed code. Im running 21 mph all stock with 22" tires. Just making sure before I replace my wires or do any upgrades, will the controller reset back to a lower speed setting (2 or 3) if I disconnect the battery or controller wires? Thanks for the help and reassurance.
Clemsonprecedent is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-29-2012, 10:29 PM   #2
Gone Wild
 
Join Date: Jul 2012
Posts: 912
Default Re: Will IQ controller reset after removing wires?

Quote:
Originally Posted by Clemsonprecedent View Post
I have an 09 precedent I2 (IQ) with 6-8volt batteries. I have a stock controller (that I assume is a Curtis 250 amp) and it is sett to the 4th speed code. Im running 21 mph all stock with 22" tires. Just making sure before I replace my wires or do any upgrades, will the controller reset back to a lower speed setting (2 or 3) if I disconnect the battery or controller wires? Thanks for the help and reassurance.
No, it won't
Speedchaser is offline   Reply With Quote
Unread 08-29-2012, 10:30 PM   #3
Member #16,745
 
jakesnake27's Avatar
Harley Davidson
 
Join Date: Aug 2009
Location: Missouri
Posts: 9,881
Default Re: Will IQ controller reset after removing wires?

Quote:
Originally Posted by Clemsonprecedent View Post
I have an 09 precedent I2 (IQ) with 6-8volt batteries. I have a stock controller (that I assume is a Curtis 250 amp) and it is sett to the 4th speed code. Im running 21 mph all stock with 22" tires. Just making sure before I replace my wires or do any upgrades, will the controller reset back to a lower speed setting (2 or 3) if I disconnect the battery or controller wires? Thanks for the help and reassurance.
I don't think it will, it shouldn't, but don't take my word for it.

Ok, good work speedchaser...
jakesnake27 is offline   Reply With Quote
Unread 08-30-2012, 07:19 AM   #4
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,543
Default Re: Will IQ controller reset after removing wires?

. . . nope . . code 4 is hard programmed in and will remain intact . . .
Stevegrmich is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Upgrading Motor, Controller, Wires,! Electric Club Car
Removing Orange Wire from Controller Electric EZGO
Upgraded wires, motor, and controller. No to little improvement??! Electric Club Car
OBC reset Electric Club Car
what to do 1st wires or controller? Electric EZGO


All times are GMT -5. The time now is 04:19 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.