lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-11-2012, 11:34 AM   #1
Not Yet Wild
 
Join Date: Aug 2012
Posts: 16
Default 1 gu cables vs 2 gu with a DCX600

Would there be any benefit or advantage to use 1 gu cables instead of 2 gu when installing a dcx600 on an otherwise stock 48v CC IQ?
WheelchairZach is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-11-2012, 01:15 PM   #2
Gone Wild
 
caokgafamily's Avatar
Club Car
 
Join Date: Oct 2008
Location: Ga
Posts: 730
Default Re: 1 gu cables vs 2 gu with a DCX600

Zach,

If it was me I would go with the 1 Guage cables, you can look it like your building for the future. Are you doing your own cables? where can you get 1 guage wire and ends to fit it? Crimping is very important as I am learning.
Good luck... Steve
PS. are you in a chair because of a SCI?
caokgafamily is offline   Reply With Quote
Unread 09-11-2012, 01:21 PM   #3
Gone Wild
 
lmswest's Avatar
 
Join Date: Jul 2012
Posts: 366
Default Re: 1 gu cables vs 2 gu with a DCX600

Tough question, with a stock motor prob not. Even with a reworked motor you prob wont see any "advantage" especially if there is a big cost difference. But if you already have the cable laying around then it certainly wont hurt.

I recently switched from high strand count cables on the motor to controller and f&r switch and auto store 4 gauge battery to battery connections and I picked up a little torque and speed with my alltrax650 and d&d motor. More stable speed as well..

All that said Scotty sells a great product at a great price. Youd be hard pressed to make your own for anywhere near that price..
lmswest is offline   Reply With Quote
Unread 09-11-2012, 02:18 PM   #4
Gone Wild
 
caokgafamily's Avatar
Club Car
 
Join Date: Oct 2008
Location: Ga
Posts: 730
Default Re: 1 gu cables vs 2 gu with a DCX600

Zach I agree with IMSWEST, ScottyB has some great cables, I only saved about $40 doing my own vs if I bought Scottys and I'm having probs with my crimp ends I did my self. I'm going to pull all of mine back off and recrimp.
Steve
caokgafamily is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Club Car IQ controller upgrade to alltrax dcx600 Electric Club Car
Cables Gas Yamaha
1/0 Battery Cables to 6 AWG Motor Cables Electric EZGO
what will changing my cables to 4g welding cables do to my performance exactly Electric EZGO
Dcx600 Electric EZGO


All times are GMT -5. The time now is 09:14 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.