lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-22-2012, 07:16 PM   #1
BAFireman84
Gone Wild
 
BAFireman84's Avatar
Club Car
 
Join Date: Sep 2011
Location: OKLAHOMA
Posts: 150
Default Diagram doesn't match what's there?!

I'm replacing my switch and cables but I'm having a hard time because my carts wiring isn't matching with the diagram I have. I'm attaching a pic of the diagram and writing some examples of what is different. Any help would be great I planned on this not taking long and having the cart ready for the family cookout tomorrow at the lake.

Cable 3-Diagram shows from controller to bottom left of F&R switch....On the cart it goes from the controller to A1.

Cable 6-Diagram shows controller to A2....on the cart it goes to the F&R switch.

Cable 8- is on the left side of the F&R switch not the right like the diagram.

Cable 5- is on the right side of the F&R switch not the left side like the diagram.

Any help will be appreciated.
Attached Images
File Type: jpg Wiring diagram.jpg (160.2 KB, 0 views)
BAFireman84 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-22-2012, 10:42 PM   #2
BAFireman84
Gone Wild
 
BAFireman84's Avatar
Club Car
 
Join Date: Sep 2011
Location: OKLAHOMA
Posts: 150
Default Re: Diagram doesn't match what's there?!

I found this diagram and it matches how my cart is wired, but it looks like this would be a sepex according to the f&r switch. Mine is the toggle not the push button.



Not sure what to do because I don't want to wire this different than how it was wired in the past since I know it ran wired that way. Man this is frustrating!
Attached Images
File Type: jpg 95-03 48V Wiring Diagram.jpg (64.0 KB, 0 views)
BAFireman84 is offline   Reply With Quote
Old 09-22-2012, 11:19 PM   #3
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Diagram doesn't match what's there?!

It will run either way, Replace your cables one at a time There are 13 cables in both diagrams... or follow the alltrax diagram. Your controller has 3 main or big blade terminals so you should be fine either way... you have a series cart if it matches either diagram... a pic of your controller would help if you have any doubts.

What year and voltage is your cart?
scottyb is offline   Reply With Quote
Old 09-23-2012, 10:29 AM   #4
BAFireman84
Gone Wild
 
BAFireman84's Avatar
Club Car
 
Join Date: Sep 2011
Location: OKLAHOMA
Posts: 150
Default Re: Diagram doesn't match what's there?!

The cart is a 2001 48V. Here is the controller and motor. The controller says Curtis on the side, but I cant make out anything else. The motor says it is a 5.5 HP for 48V and is from Santiago Golf Cart Supply. Thanks for the help. Told you I could mess this up no matter how easy it is.
Attached Images
File Type: jpg controller.jpg (101.8 KB, 0 views)
File Type: jpg motor.jpg (102.4 KB, 0 views)
BAFireman84 is offline   Reply With Quote
Old 09-23-2012, 10:47 AM   #5
lmswest
Gone Wild
 
lmswest's Avatar
 
Join Date: Jul 2012
Posts: 366
Default Re: Diagram doesn't match what's there?!

Quote:
Originally Posted by BAFireman84 View Post
The cart is a 2001 48V. Here is the controller and motor. The controller says Curtis on the side, but I cant make out anything else. The motor says it is a 5.5 HP for 48V and is from Santiago Golf Cart Supply. Thanks for the help. Told you I could mess this up no matter how easy it is.
Hmm, sounds like an upgraded motor. My 2001 48v was a 3.1 hp motor
lmswest is offline   Reply With Quote
Old 09-23-2012, 11:25 AM   #6
BAFireman84
Gone Wild
 
BAFireman84's Avatar
Club Car
 
Join Date: Sep 2011
Location: OKLAHOMA
Posts: 150
Default Re: Diagram doesn't match what's there?!

On the F&R switch does it matter which one goes to S1 or S2? This is the only difference I see in the two diagrams I'm looking at now. Halfway done by the way. I'm getting there.
BAFireman84 is offline   Reply With Quote
Old 09-24-2012, 08:41 PM   #7
BAFireman84
Gone Wild
 
BAFireman84's Avatar
Club Car
 
Join Date: Sep 2011
Location: OKLAHOMA
Posts: 150
Default Re: Diagram doesn't match what's there?!

I finished the cables and switch on Sunday and even got to take it out to the lake to test out the new upgrades. I can say these items are thr real deal and if anything maybe a little under rated. It was a more than obvious difference from the old cables and F&R switch. Bravo Scottyb you've got another happy customer and just secured me as a customer for the rest of my upgrades.
BAFireman84 is offline   Reply With Quote
Reply

Tags
club car electric, extreme dc, hunting buggy, off road cart
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Help with Curtis Controller Model Match Up Electric EZGO
400 amps and wires to match Electric Club Car
Converting seat to match roof problem Gas EZGO
EZ GO color match Body and Paint


All times are GMT -5. The time now is 03:49 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.