lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-06-2008, 08:02 PM   #1
Not Yet Wild
 
Join Date: Jul 2008
Posts: 19
Default Trouble removing 36v motor 91 CC

I just removed the bolts and bracket holding the motor to the case. I can spin the motor body but it will not come out. Is the spline just rusted in the drive or do I need to disassemble the rear end. 91 36 volt with vglide.
bparramore is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-06-2008, 09:12 PM   #2
Just me. .
 
phasetim's Avatar
Club Car
 
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
Default Re: Trouble removing 36v motor 91 CC

usually you can gently pry with a screwdriver to get it started.

taking the rear end apart will not help
phasetim is offline   Reply With Quote
Unread 08-06-2008, 09:23 PM   #3
Not Yet Wild
 
Join Date: Jul 2008
Location: Myrtle Beach, SC
Posts: 61
Default Re: Trouble removing 36v motor 91 CC

Had the same problem if you take the end of the motor and take the can off all that will be left is the armature on the input shaft if you have or have access to an aceteline torch heat the coupler and tap the armature easily it will pop apart a reguler torch for soldering pipes will work but takes longer if you are getting another motor the harder you hit the armature the faster it will release i had the same issue with a 91 and had to ruin the armature
spdstr158 is offline   Reply With Quote
Unread 08-06-2008, 09:34 PM   #4
Gone Wild
 
Fishing Dude's Avatar
Club Car
 
Join Date: Jul 2008
Location: Slums of Lake Erie
Posts: 3,722
Default Re: Trouble removing 36v motor 91 CC

Have a 30 lb sludge hammer you can use.
Fishing Dude is offline   Reply With Quote
Unread 08-06-2008, 09:45 PM   #5
Not Yet Wild
 
Join Date: Jul 2008
Location: Myrtle Beach, SC
Posts: 61
Default Re: Trouble removing 36v motor 91 CC

that was what i had to use alot of heat and beating there was no little screwdriver and coaxing it
spdstr158 is offline   Reply With Quote
Unread 08-06-2008, 10:07 PM   #6
Not Yet Wild
 
Join Date: Jul 2008
Posts: 19
Default Re: Trouble removing 36v motor 91 CC

I was able to pry the motor case off with the screwdriver and the armature shaft is stuck in the differential. I sprayed it with wd40 and will let it sit overnight and see if I can get it tomorrow. Thanks for all your help.
bparramore is offline   Reply With Quote
Unread 08-06-2008, 11:01 PM   #7
Not Yet Wild
 
Join Date: Jul 2008
Location: Myrtle Beach, SC
Posts: 61
Default Re: Trouble removing 36v motor 91 CC

try a penatrating spray like pb nut buster wd is not strong enough to break the rust in most cases
spdstr158 is offline   Reply With Quote
Unread 08-07-2008, 04:54 PM   #8
Not Yet Wild
 
Join Date: Jul 2008
Posts: 19
Default Re: Trouble removing 36v motor 91 CC

Thanks, I'll give it a try.
bparramore is offline   Reply With Quote
Unread 08-07-2008, 05:01 PM   #9
Not Yet Wild
 
Join Date: Jul 2008
Location: Myrtle Beach, SC
Posts: 61
Default Re: Trouble removing 36v motor 91 CC

good luck
spdstr158 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Removing brake drums? Electric EZGO
Removing key ignition Electric EZGO
Removing V-Twin Flywheel Gas Club Car
Removing the air filter box Gas Yamaha
Removing body from 02 EZGO Gas EZGO


All times are GMT -5. The time now is 06:33 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.