|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-19-2012, 01:20 PM | #1 |
Getting Wild
Join Date: Oct 2012
Location: North Central Indiana
Posts: 80
|
alignment question
I have a 2007 precedent with an all sport 6" lift. I am seeing uneven wear patterns on the front tires. What is a good method for setting up front end?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-19-2012, 03:07 PM | #2 |
Getting Wild
Join Date: Jul 2012
Posts: 95
|
Re: alignment question
Whether it was correct or not I can't tell you. But I just lifted my 07 Precedent a couple weeks ago and I used a 2x4. I placed it through the centerline of the rear tire and adjusted the toe in or out until the 2x4 touched the backside of the front tire and was about a 1/4" from touching the frontside of the tire.
George Last edited by Culln5; 10-19-2012 at 03:08 PM.. Reason: spelling |
10-19-2012, 03:28 PM | #3 |
Not Yet Wild
Join Date: Sep 2012
Posts: 8
|
Re: alignment question
Not 100% on this but coming from the race car world you should adjust to have an 1/8" toe out.
|
10-19-2012, 11:32 PM | #4 |
Not Yet Wild
Join Date: Jun 2011
Location: cliffside NC
Posts: 56
|
Re: alignment question
http://www.buggiesgonewild.com/elect...alignment.html
I hope this link works. This was brought up a few weeks ago. Toe on circle track cars are set toe out but most other types of cars are set slightly toe in. |
10-20-2012, 09:04 AM | #5 |
Getting Wild
Join Date: Oct 2012
Location: North Central Indiana
Posts: 80
|
Re: alignment question
That's is good info , just one question. When you mention camber and say to level the wheel, are plumbing the wheel?
|
10-21-2012, 01:50 PM | #6 |
Not Yet Wild
Join Date: Jun 2011
Location: cliffside NC
Posts: 56
|
Re: alignment question
Yes, with the cart's suspension loaded, use a level to plumb the wheel. Make sure to only do the wheel and no part of the tire. I use a piece of square tubing the same diameter of my rim so that I get a nice flat area to place my level
Mark |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
cant keep alignment | Electric Club Car | |||
G2 alignment | Gas Yamaha | |||
Front alignment question | Gas EZGO | |||
alignment ? | Electric EZGO | |||
Newbie lift and alignment question | Lifted Golf Carts |