lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-01-2012, 12:41 PM   #11
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Question Re: 03 CC Pathway wont do anything

Should I try jumping the solenoid at this point? or do I have bigger problems.....?
EZRider79 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-01-2012, 12:52 PM   #12
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,060
Default Re: 03 CC Pathway wont do anything

You can jump the solenoid or just connect both large cables to one Post, that will bypass the solenoid.

Lets go back to the orig. problem
Boy runs down mailbox, cart won't work.
2003 CC has a throttle input device (MCOR) mounted under the floor on the passenger side... take a good hard look at what might have happened to the MCOR, the linkage, the wires and anything else associated with the throttle signal sender.
scottyb is offline   Reply With Quote
Unread 11-01-2012, 01:54 PM   #13
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Default Re: 03 CC Pathway wont do anything

Ok I agree I've been up under it and everything looks fine nothing seems to be scratched or busted or cracked on the MCOR whats the next step? test it with a multi meter?
EZRider79 is offline   Reply With Quote
Unread 11-01-2012, 02:01 PM   #14
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Default Re: 03 CC Pathway wont do anything

Would the same test procedures that you would do to check the MCOR, Solenoid, etc.etc. on a 05 precedent work on this 03 Pathway?
EZRider79 is offline   Reply With Quote
Unread 11-05-2012, 12:34 PM   #15
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Default Re: 03 CC Pathway wont do anything

Hello??? Even with the cart key switched off and tow switch set to TOW and F/R set to Nutral theres still 50v on the green and white wire at the controller as well as 50v on both large posts of solenoid is that normal??? if not what would cause this?
EZRider79 is offline   Reply With Quote
Unread 11-05-2012, 02:57 PM   #16
The Last Moja Morani
 
shadowman's Avatar
Club Car
 
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
Default Re: 03 CC Pathway wont do anything

i don,t think i read everything but have you tested the controller? if cart was towed or pushed without the run tow switch being in tow theres a good chance you they damaged controller......if you covered this already sorry......................
shadowman is offline   Reply With Quote
Unread 11-06-2012, 02:26 PM   #17
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Question Re: 03 CC Pathway wont do anything

Nah man don't be sorry thx for responding any ideas or suggestions at this point is good thing! I've read so much info that now i know enough to confuse myself is there a way to test components separately ( taken off the cart and bench tested maybe???) just seems that would be easier at this point but haven't found any info on doing such...if not whats the best way to go about testing the controller on an 03 IQ car its a Curtis 1510-5201? does it have an led under the make/model label like ive been reading about? i feel the indention but haven't seen it light up yet and really didnt want to peel off the label? and most of the wiring diagrams and bypass info I found is for other carts like 05 precedents and such and the wire colors are always diff? not sure if I'm running tests correctly?....BrEaKtImE!
EZRider79 is offline   Reply With Quote
Unread 11-06-2012, 02:35 PM   #18
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,060
Default Re: 03 CC Pathway wont do anything

The LED light you have been reading about is on the Alltrax controls.

There are tests for the controller but you need to keep it in the system to test.

Does the solenoid click when you press the gas?
scottyb is offline   Reply With Quote
Unread 11-06-2012, 03:16 PM   #19
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,060
Default Re: 03 CC Pathway wont do anything

Give the battery pack voltage reading for reference.
With the cart on jacks for safety.....
Key on & cart in gear.
Put your test leads on B+ and B- of the controller. press the gas . should read full pack voltage.
Now put the test leads on B- and M-. should get full pack voltage when the solenoid just clicks then voltage reading should drop as the peddle is pressed.
scottyb is offline   Reply With Quote
Unread 11-06-2012, 03:48 PM   #20
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Default Re: 03 CC Pathway wont do anything

Pack Voltage = 50.1v

B+ and B- of controller = 49.5v regardless of pedal movement

B- and M- = stays at 49.5v regardless of pedal movement

Solenoid = Does not click
EZRider79 is offline   Reply With Quote
Reply

Tags
48v meter, cc iq, clubcar pathway
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Pathway Wiring Electric Club Car
Pathway same as DS? Electric Club Car
Lifting a Pathway? Electric Club Car
2003 Pathway Value? Electric Club Car


All times are GMT -5. The time now is 10:59 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.