lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-09-2012, 04:27 PM   #31
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Default Re: 03 CC Pathway wont do anything

lol well dangit key switch on, tow switch set to run, jumper on solenoid it clicks, put in foward press pedal ....nothing no drop in voltage and no click from solenoid...put in Reverse press pedal...nothing no click no drop in voltage .... so this tells us the controller is bad right?
EZRider79 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-09-2012, 05:28 PM   #32
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: 03 CC Pathway wont do anything

If the reading between B- and M- is full pack voltage when the solenoid clicks and does not drop when the gas is pressed it might be a bad controller if you verify that the throttle input signal is correct and the F&R is intact as well as all the high amp cables.
Sorry it aint easier. Scottyb
scottyb is offline   Reply With Quote
Unread 11-09-2012, 08:16 PM   #33
Not Yet Wild
 
Join Date: Oct 2012
Posts: 1
Default Re: 03 CC Pathway wont do anything

Quote:
Originally Posted by EZRider79 View Post
lol well dangit key switch on, tow switch set to run, jumper on solenoid it clicks, put in foward press pedal ....nothing no drop in voltage and no click from solenoid...put in Reverse press pedal...nothing no click no drop in voltage .... so this tells us the controller is bad right?
Had these same symptoms recently on our 09' Precedent. Replaced controller and has so far fixed issue.
MrChris is offline   Reply With Quote
Unread 11-10-2012, 03:21 PM   #34
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Question Re: 03 CC Pathway wont do anything

Can I use the 2005 precedent service manual as a guide to test the MCOR? The only difference I see is the purple/white wire in the manual is lightblue/white on my wiring harness....is this correct?
EZRider79 is offline   Reply With Quote
Unread 11-14-2012, 09:42 PM   #35
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Talking Re: 05 Precedent Service Manual

Here's the link for the Service Manual I'm refering too. It wont easy to find maybe it'll help some one else with there project/nightmare

2005 Precedent Service/Maintenance Manual -->

http://golftechs.us/Manuals/2005%20p...e%20manual.pdf
EZRider79 is offline   Reply With Quote
Unread 11-14-2012, 10:37 PM   #36
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,079
Default Re: 03 CC Pathway wont do anything

The MCOR test


Good luck with the test, Let us know what results you get.
Attached Images
File Type: jpg MCOR Test (1).jpg (405.7 KB, 0 views)
File Type: jpg MCOR Test (2).jpg (495.4 KB, 0 views)
scottyb is offline   Reply With Quote
Unread 11-14-2012, 11:13 PM   #37
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,009
Default Re: 03 CC Pathway wont do anything

Does your reverse buzzer work? Don't overlook the simple stuff. If the buzzer doesn't sound it may be because the controller isn't powered up. This can be because of a bad OBC just as your dealer told you. Un-plug the 6 pin connector of the OBC and jump the Red wire to the Blue wire with a paperclip and see what the cart will do.
TahoeDawgZ71 is offline   Reply With Quote
Unread 11-16-2012, 03:58 PM   #38
Not Yet Wild
Club Car
 
Join Date: Jul 2011
Posts: 28
Smile Re: 03 CC Pathway wont do anything

Ok sorry for the delay, Going by the print out you posted ScottyB starting at MCOR Voltage Test without the Diagnostic Handset

#2 Reading = 50.4v

#4 Reading = (using #4 BATT) = -15.51v
#4 Reading = (using #6 BATT instead of #4 BATT as stated in the test) = 1.10v

#6 Reading = Pedal UP = 0.06, Pedal Down = 1.03v

#8.4 Reading = 1.

#8.5 Reading = 1.

#8.7 Reading = 8.38

#8.8 Reading = 1.88

#8.9 = Replace MCOR.....Right?

Is it possible the MCOR is my only problem?

and I did try the jumper you mentioned TahoeDawgZ71 with no change in the cart....wouldnt do anything in either Forward or Reverse....hope that isnt a bad thing....

Thank you guys for all your help and suggestions on this project MANY MANY THANKS
EZRider79 is offline   Reply With Quote
Reply

Tags
48v meter, cc iq, clubcar pathway
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Pathway Wiring Electric Club Car
Pathway same as DS? Electric Club Car
Lifting a Pathway? Electric Club Car
2003 Pathway Value? Electric Club Car


All times are GMT -5. The time now is 12:02 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.