Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (http://www.buggiesgonewild.com/)
-   Electric Club Car (http://www.buggiesgonewild.com/electric-club-car/)
-   -   New Motor Brush Install (http://www.buggiesgonewild.com/electric-club-car/72635-new-motor-brush-install.html)

Kave_Man 11-07-2012 09:31 AM

New Motor Brush Install
 
I am replacing the brushes in my CC 36v motor and I'm not sure if there is a certain placement sequence for the brushes. When I disassembled the motor, one pair of brushes were completely destroyed and the cables were no longer connected to them so I couldn't tell how the original brushes were installed. As far as I know, the brushes are the "A" posts on your motor, but does it matter which brushes go to the upper & lower "A" posts? Also, does it matter which mount the brushes are installed on the motor in relation to each other? I'm trying to find a diagram or manual for reference. Thanks.

shadowman 11-07-2012 09:51 AM

Re: New Motor Brush Install
 
its been a while since i did the last set but i don,t think it matyters and if it does it there should be something saying that with the new brushes........................8)

Kave_Man 11-07-2012 10:00 AM

Re: New Motor Brush Install
 
Shadowman, there were no install instructions included with the new brushes. I guess I'll install new brushes and bench test. Also, can I use my 12 volt lawn tractor battery to bench test? Thx.

scottyb 11-07-2012 10:25 AM

Re: New Motor Brush Install
 
I think you get a short lead pair and a long lead pair and once you get started it becomes clear where the longer leads go? no? Otherwise it should not matter....

Kave_Man 11-07-2012 10:46 AM

Re: New Motor Brush Install
 
Scotty, yes each pair of brushes (2 of em) has a short and long lead. So it doesn't matter which mount bracket they get installed in or which stud gets installed as the A1 or A2 post? I'm just double-checking. First time cart owner & first time to work on an electric motor. thx.

scottyb 11-07-2012 10:52 AM

Re: New Motor Brush Install
 
yes, both sets of brushes are the same.

I' not sure I understand your question

Kave_Man 11-07-2012 10:57 AM

Re: New Motor Brush Install
 
Does it matter which brush stud gets installed in the A1 and A2 locations on the motor housing?


All times are GMT -5. The time now is 02:24 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.