|12-18-2012, 06:19 AM||#1|
Join Date: Jun 2011
Location: Viera, FL
Used controller advice
A few weeks ago I aquired a used FSIP 500 amp control (got a great deal).
I spent lots of hours removing everything from my car so that I could install the monster. Had to drill new holes, etc....
When I took my cart for a test ride, it was slower than my stock control and had less torque.
I sent it to FSIP and they re-programmed it for me. Now it throws you back in the seat and does about 30 mph with my current Commander motor.
(I have a PQ Exucutioner on the way, but that's a different thread)
So the lesson: If you buy a used controller that is not programmable from home, send it out for reprogramming first.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|12-18-2012, 07:43 AM||#2|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: Used controller advice
Good advice. Controllers can be programmed for a specific motor which may leave the second buyer with a mismatch.
|Controller advice!!||Electric EZGO|
|Controller advice for golfster||Electric golf carts|
|Controller advice||Columbia ParCar|
|Controller upgrade advice.||Electric EZGO|
|New Controller advice and where to purchase||Electric Club Car|