|12-22-2012, 07:05 AM||#1|
Join Date: Jul 2011
brake light wiring
i have a 36 volt club car, the light wiring harness was all cut up. i replaced it with a new universal wire harness with lights. the cart has the micro swith for the brake lights with two green wires coming from the switch. where do they connect?
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|12-24-2012, 10:13 AM||#4|
Join Date: Nov 2008
Location: Peachtree City, Georgia
Re: brake light wiring
Assuming your lights are already wired.... to work with the on/off switch, then all you'll need to do is run a power feed to the mircro switch and then from the micro switch back to the brake light lead. The lights themselves will have a negative connection already with the normal light wiring, just tap another positive off of the same source to feed the brake light switch so essentially each light will have three connections. 1 negative, and 2 positives (normal on, and brake light activation).
|Brake & Light Wiring Question - 2009 Club Car Precedent||Electric Club Car|
|Ezgo PDS Brake light wiring||Electric EZGO|
|Brake Light Wiring||Electric Club Car|
|Brake light wiring||Gas Club Car|
|Turn signal and brake light wiring||Electric EZGO|