|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-22-2012, 08:05 AM | #1 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
brake light wiring
i have a 36 volt club car, the light wiring harness was all cut up. i replaced it with a new universal wire harness with lights. the cart has the micro swith for the brake lights with two green wires coming from the switch. where do they connect?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-22-2012, 10:21 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: brake light wiring
Is this micro on the brake pedal ?
|
12-24-2012, 10:59 AM | #3 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re: brake light wiring
yes the micro switch is on the pedal.
|
12-24-2012, 11:13 AM | #4 |
Gone Wild
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
|
Re: brake light wiring
Assuming your lights are already wired.... to work with the on/off switch, then all you'll need to do is run a power feed to the mircro switch and then from the micro switch back to the brake light lead. The lights themselves will have a negative connection already with the normal light wiring, just tap another positive off of the same source to feed the brake light switch so essentially each light will have three connections. 1 negative, and 2 positives (normal on, and brake light activation).
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Brake & Light Wiring Question - 2009 Club Car Precedent | Electric Club Car | |||
Ezgo PDS Brake light wiring | Electric EZGO | |||
Brake Light Wiring | Electric Club Car | |||
Brake light wiring | Gas Club Car | |||
Turn signal and brake light wiring | Electric EZGO |