|01-15-2013, 09:06 PM||#11|
Join Date: Jul 2012
Re: Non lifted cart wheel/tire size
Mine rubbed pretty good on hard right turns as well. I had to completely remove the wire guard (inner and out cover..there are two layers) to get my full turning radius. I laid a flat piece of fiberglass down and the wires are still protected. They run under your floor mat in a channel as well. I will also tell you that if you add a back seat and any extra weight, accessory battery, etc. you may have some issues with rubbing on the rear fender. I had to install HD springs and I may end up adding a 3" lift to cure this. If not I will be trimming the fender itself. With my wife and her buddy in the back it is fine, but when my friend and I jump back there it is CLOSE.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|Tire and wheel size ?||Gas Club Car|
|A little tire/wheel size help please||Lifted Golf Carts|
|A little tire/wheel size help please||Gas EZGO|
|Wheel and Tire size?||Electric Club Car|
|max tire size non-lifted||Gas EZGO|