|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-10-2013, 12:07 PM | #1 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
what is the process to remove a IQ motor
Its been a while since I've had to pull the motor and I don't remember what all I have to do. I've search with no luck and last time I was able to just call PQ but they are closed today
Thanks in advance |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-10-2013, 01:40 PM | #2 |
haveacupofshutthe****up
Join Date: Jun 2011
Location: Viera, FL
Posts: 739
|
Re: what is the process to remove a IQ motor
If it's a CC IQ: Tow/Run to tow position. Disconnect one of the battery pack cables to prevent any shocks/shorts. Use two wrenches to loosen the nuts on the terminals (one to hold one nut and one to turn the other). There should be 3 or 4 bolts connecting the motor to the transmission/gear housing. The speed sensor should disconnect easily. The motor should slide out with a little elbow grease as needed. It's heavy, so be careful. I back my cart onto ramps and get underneath it. I use my chest as a place to put the motor when I get it free of the housing.
Safety first...Use wheel chocks and disconnect those battery cables!!! |
02-10-2013, 02:46 PM | #3 |
REAL MEN GET EM DIRTY
Join Date: Jun 2009
Location: rincon , ga.
Posts: 3,646
|
Re: what is the process to remove a IQ motor
I got it out, pq told me a sequence of taking it out and I couldnt remember if there was anything special. But it's out now, now to ship off the speed motor and wait for the torque motor
Thanks bud |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to remove Motor | Electric EZGO | |||
Easiest way to remove stock yamaha clutch from motor | Big Block Talk! | |||
Is it difficult to remove Motor in EZGo PDS Cart? | Electric EZGO | |||
Do I need to remove my motor?? | Gas EZGO | |||
How to remove stock electric motor? | Electric EZGO |