lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-18-2013, 09:22 PM   #1
Gone Wild
 
texan's Avatar
 
Join Date: Nov 2012
Posts: 150
Default 09 precedent IQ wiring

After reading several post I am still confused. On the solenoid which is positve blue from mcor or blue/white from pin 12 on the connector ?

Thanks
texan is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-21-2013, 10:28 PM   #2
Not Yet Wild
 
Bangker's Avatar
Club Car
 
Join Date: Jul 2011
Location: Selma, AL
Posts: 15
Default Re: 09 precedent IQ wiring

If it's like mine, the spades are two different sizes, so you can only connect them one way.
Bangker is offline   Reply With Quote
Unread 02-22-2013, 09:27 AM   #3
Gone Wild
 
texan's Avatar
 
Join Date: Nov 2012
Posts: 150
Default Re: 09 precedent IQ wiring

Bangker
I am doing a upgrade to 500 amp Alltrax and 400 amp solenoid. Does not have spade connectors. Need to know which is positive for diode
Talked to Scottyb he said leave diode off till I can ckeck with a meter he wasn't for sure on a Precedent.
thanks
texan is offline   Reply With Quote
Unread 02-23-2013, 10:17 AM   #4
Gone Wild
 
Join Date: Jul 2012
Posts: 912
Default Re: 09 precedent IQ wiring

I am not sure I understand the question. The solenoid does not have a positive or negative it depends on how you hook up your wires.
On mine I have the main positive going to the large terminal on the right and the large left terminal to the controller. The blue and white wire is connected to the small terminal on the left side. Solid blue to small terminal on right side.

You will install the diode according to how you install your wires on the terminals. The band side o the diode goes to the solid blue side on the small terminal and the other to the blue/white terminal.

Is this what you are asking? I could post a picture of mine if that would help.
Speedchaser is offline   Reply With Quote
Unread 02-23-2013, 12:24 PM   #5
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: Rancho Murieta, CA
Posts: 83
Question Re: 09 precedent IQ wiring

Speedchaser,

I was told just the opposite from Ron at Alltraxinc.com yesterday while installing my 500amp controller on my 06 Precedent. I have it hooked up with the blue/white as the positive (diode band side) and the blue as the negative.

I just posted a thread about not really being impressed with the new controller with everything else being in good condition. Could this diode being wired incorrectly harm my performance? I don't believe so but I honestly don't understand exactly what that diode does.

If I have it backwards per Ron, can I simply reverse the wires or have I now damaged that diode?

Thanks in advance.

Steve
7CLUB is offline   Reply With Quote
Unread 02-23-2013, 01:10 PM   #6
Getting Wild
Club Car
 
Join Date: Feb 2011
Location: Rancho Murieta, CA
Posts: 83
Exclamation Re: 09 precedent IQ wiring

MY APOLOGIES!

I got that wrong. I just rechecked my notes and Ron at Alltraxinc. DID NOT TELL ME THE BLUE/WHITE WAS POSITIVE. It is NEGATIVE. The Blue wire is the positive and the diode band side should be connected to whichever terminal on the solenoid that the solid blue wire is connected to. There is no right or wrong with regard to which terminal you choose so long as the blue whire and the diode band are on the same side.

Again, MY APOLOGIES!

Steve
7CLUB is offline   Reply With Quote
Unread 02-23-2013, 08:22 PM   #7
Gone Wild
 
texan's Avatar
 
Join Date: Nov 2012
Posts: 150
Default Re: 09 precedent IQ wiring

Thanks Speechaser, thats what I was needing.
texan is offline   Reply With Quote
Unread 02-23-2013, 08:26 PM   #8
Gone Wild
 
texan's Avatar
 
Join Date: Nov 2012
Posts: 150
Default Re: 09 precedent IQ wiring

Thanks Speedchaser, thats what I was needing.
texan is offline   Reply With Quote
Unread 03-01-2013, 09:50 PM   #9
Gone Wild
 
texan's Avatar
 
Join Date: Nov 2012
Posts: 150
Default Re: 09 precedent IQ wiring

Ok got everything installed 500 Alltrax, 400 amp solenoid, 2 ga. cables. Took diode off for testing per Scottyb. The solid blue wire was the postive as Speed said.With the cart on blocks turn key on hear solenoid click than a short time later a lighter click. While pressing on go pedal hear a faint click from MCOR than another click from what I figure is the controller than power to rear wheel. Does all this sound correct? Also the pedal goes close to half way down before any power. Is there a adjustment for this or is that norm. ?
Thanks to all the good info. on this forum that got me thru this.
texan is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring for stereo on 07 precedent Electric Club Car
Wiring lights n 07 Precedent Electric Club Car
wiring diagram for precedent Gas Club Car
Wiring help 2005 C/C Precedent Electric Club Car
Precedent Wiring Diagrams Electric Club Car


All times are GMT -5. The time now is 11:32 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.