lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-31-2013, 08:00 AM   #11
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,074
Default Re: New Upgrade need alltrax programing help

There must be some connection that is better when he presses left and worse when he presses right? IF the MCOR works good with one foot position and not the other, I doubt the MCOR is bad.
scottyb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-31-2013, 11:12 AM   #12
Gone Wild
 
Join Date: Jul 2012
Posts: 912
Default Re: New Upgrade need alltrax programing help

Jerky throttle is well known and has been discussed in other threads and like DJ said, it is most likely the MCOR. Even though it worked perfect with the stock Curtis controller, the Alltrax does not work with a weak signal. Some have cleaned the connections on the mcor and have fixed the problem as well.

The jerkiness can be reduced by changing the throttle map and throttle up rate as well but that is not addressing the real problem.

I do not know what the op is saying about right or left, that is not making any sense to me. The precedent does not have linkage like the old ds models. It is more like a screwdriver attached to the pedal that is also attached to the mcor. As the pedal is pressed the screwdriver turns the mechanism on the mcor, I cant see where there would be a failure there but I would pull the pedal assembly and check it out.
Speedchaser is offline   Reply With Quote
Unread 03-31-2013, 02:38 PM   #13
Gone Wild
 
DJBlade's Avatar
Club Car
 
Join Date: Dec 2011
Location: Columbia, South Carolina
Posts: 258
Default Re: New Upgrade need alltrax programing help

The only thing I can think of that would make a difference on which side of the pedal you push on having a different affect would be something broken in the MCOR...or the small plastic adapter from the pedal to the MCOR...idk...might need to take it out and have a look.
DJBlade is offline   Reply With Quote
Unread 03-31-2013, 06:00 PM   #14
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,074
Default Re: New Upgrade need alltrax programing help

Or maybe the peddle to the 'driver' connection is worn and is effected by pushing the peddle a little sideways and down?
I dunno, I'm just reading what was posted.
scottyb is offline   Reply With Quote
Unread 03-31-2013, 06:08 PM   #15
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,981
Default Re: New Upgrade need alltrax programing help

My money is on the bad MCOR. We just did a bunch of warranty work with mcors that would drop out when the pedal was rocked side to side. Very uncommon. But I've seen it recently more than ever.
TahoeDawgZ71 is offline   Reply With Quote
Unread 03-31-2013, 06:25 PM   #16
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,074
Default Re: New Upgrade need alltrax programing help

Nice ...
scottyb is offline   Reply With Quote
Unread 03-31-2013, 07:18 PM   #17
Gone Wild
 
jlmurphy's Avatar
Club Car
 
Join Date: Nov 2010
Location: East to Southeast,Texas
Posts: 186
Default Re: New Upgrade need alltrax programing help

I think I will buy a MCOR. Anyone no where to get a good one.
jlmurphy is offline   Reply With Quote
Unread 03-31-2013, 08:44 PM   #18
Gone Wild
 
Join Date: Jul 2012
Posts: 912
Default Re: New Upgrade need alltrax programing help

They are all the same as far as I know. If Scottyb does not have them then check evdrives
Speedchaser is offline   Reply With Quote
Unread 04-07-2013, 08:46 PM   #19
Gone Wild
 
jlmurphy's Avatar
Club Car
 
Join Date: Nov 2010
Location: East to Southeast,Texas
Posts: 186
Default Re: New Upgrade need alltrax programing help

back to the drawing board. Changed the mcor no help, tryed HEXb nad Hex 4 files, tryed throtle at 2 on both Hex files?
jlmurphy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
New Alltrax DCX 400 Upgrade Kit For Sale Golf Carts and Parts
Alltrax DCX400 PDS upgrade results Electric EZGO
Help Programing Alltrax Controller Electric Club Car
alltrax programing Electric EZGO
Alltrax Programing Extreme DC!


All times are GMT -5. The time now is 05:56 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.