|04-13-2013, 08:06 PM||#1|
Join Date: Jan 2012
Location: Conway,Arkansas 72032
This will most likely be in Scotts wheel house. I just finished a conversion (c 74) on a 1990 club car. All went well after some help from Scotty.
Now to the problem, The cart ran about 30 yards and blew a 60 amp fuse. Now I had ran the cart a few times on jacks stands with out any problems. Now I have checked everything for loose wire are anything not wired right. Could not find anything wrong. Will this up grade pull enough amp to blow a 60 amp fuse?????
I didn't see on any of the instruction to use a fuse, So that may be the problem. Just trying to make sure everything Is on the OK.
Thanks for the help
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|04-13-2013, 11:38 PM||#2|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Sounds like it's okay.
You have a 700 amp control, if you are going to fuse the power supply use a 400 amp ANA type fuse.
|PDS 36V- 48V conversion||Electric EZGO|
|36v to 48v conversion||Electric Club Car|
|36v to 48v Conversion||Electric EZGO|
|ds conversion 4(12) to 6(8)||Electric Club Car|