04-13-2013, 08:06 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
conversion
This will most likely be in Scotts wheel house. I just finished a conversion (c 74) on a 1990 club car. All went well after some help from Scotty.
Now to the problem, The cart ran about 30 yards and blew a 60 amp fuse. Now I had ran the cart a few times on jacks stands with out any problems. Now I have checked everything for loose wire are anything not wired right. Could not find anything wrong. Will this up grade pull enough amp to blow a 60 amp fuse????? I didn't see on any of the instruction to use a fuse, So that may be the problem. Just trying to make sure everything Is on the OK. Thanks for the help Sonny |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2013, 11:38 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: conversion
Sounds like it's okay.
You have a 700 amp control, if you are going to fuse the power supply use a 400 amp ANA type fuse. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
PDS 36V- 48V conversion | Electric EZGO | |||
36v to 48v conversion | Electric Club Car | |||
36v to 48v Conversion | Electric EZGO | |||
ds conversion 4(12) to 6(8) | Electric Club Car |