lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-08-2013, 01:51 PM   #21
72 volt torque monster
 
scottginfla's Avatar
Club Car
 
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
Default Re: 2000 Custom Club Car Questions

When you turned the tires by hand, did you have somebody holding the other tire to keep it from moving? if not then you were only turning the rear end, not the motor, by holding the other tire that will allow the motor to turn, I would start with the motor, as that's the thing you just changed.
scottginfla is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-08-2013, 02:06 PM   #22
Not Yet Wild
 
Join Date: Apr 2013
Posts: 20
Default Re: 2000 Custom Club Car Questions

No, I turned the driver side with out anyone holding the other side, but I guess that at least rules out the rear end; right? So If I have the same sound when i have someone holding the other tire then that means the sound is coming form the motor; Right? If the sound is coming form the motor what should I do? Does that mean the motor is burning out even though it seems to run strong?
rphillips is offline   Reply With Quote
Unread 08-08-2013, 02:37 PM   #23
72 volt torque monster
 
scottginfla's Avatar
Club Car
 
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
Default Re: 2000 Custom Club Car Questions

yes, rear sounds fine. yes, that would mean sound in motor. could be just the main bearing in the motor, or might need to be rebuilt, know way of knowing at this point.
scottginfla is offline   Reply With Quote
Unread 08-08-2013, 02:41 PM   #24
Not Yet Wild
 
Join Date: Apr 2013
Posts: 20
Default Re: 2000 Custom Club Car Questions

Ok Thanks, Guess I will be pulling the motor again. Thanks again for you quick response.
rphillips is offline   Reply With Quote
Unread 08-08-2013, 02:46 PM   #25
72 volt torque monster
 
scottginfla's Avatar
Club Car
 
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
Default Re: 2000 Custom Club Car Questions

just to clarify, if both wheels were off the ground then previous statement holds true, if only the drivers side was up, but passenger side still on ground, then it was being held by the ground.
scottginfla is offline   Reply With Quote
Unread 08-08-2013, 02:54 PM   #26
Not Yet Wild
 
Join Date: Apr 2013
Posts: 20
Default Re: 2000 Custom Club Car Questions

Got it, both side were off the ground. Just seems weird that the sound would happen all at once. Seems like it would gradually happen, but guess that's just my luck.
rphillips is offline   Reply With Quote
Unread 08-08-2013, 05:38 PM   #27
STEALTH 4X4
 
sunoco's Avatar
Club Car
 
Join Date: Sep 2011
Location: GA
Posts: 2,017
Default Re: 2000 Custom Club Car Questions

Sounds like you need motor centering kit am10039 or motor guide ring, depending on which yours takes
sunoco is offline   Reply With Quote
Unread 08-09-2013, 09:09 AM   #28
Not Yet Wild
 
Join Date: Apr 2013
Posts: 20
Default Re: 2000 Custom Club Car Questions

A little more information would be nice, what is a motor center kit and how do I tell which one I need?
rphillips is offline   Reply With Quote
Unread 08-12-2013, 01:23 PM   #29
Not Yet Wild
 
Join Date: Apr 2013
Posts: 20
Default Re: 2000 Custom Club Car Questions

Ok another update, I took the motor apart over the weekend and the bearing in the motor was functional however it has a dent in the side. When turning the bearing with my hand I could tell the problem was with the bearing. Replace the bearing with a NTN 6203 and it is back to normal.

One question though, the parts store did not have the exact bearing the one out of the cart is a 6203Z and the one I used to replace it is a 6203c3. The 6203Z has covers on each side over the balls bearings and the 6203c3 does not. Is there any reason this would cause a problem?
rphillips is offline   Reply With Quote
Unread 08-12-2013, 01:44 PM   #30
72 volt torque monster
 
scottginfla's Avatar
Club Car
 
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
Default Re: 2000 Custom Club Car Questions

The stock bearing is sealed, and it sounds like the replacement one you used is not, and won't last long due to the fact that you have no way to lube it, get the sealed bearing.
scottginfla is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
G9 custom lift questions Gas Yamaha
2000 Columbia Par Car questions Gas Columbia ParCar
2000 g16 build (motor) questions Gas Yamaha
2009 Tomberlin E-Merge SS Custom Custom Custom Tomberlin


All times are GMT -5. The time now is 04:05 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.