|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-28-2013, 08:40 PM | #1 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
2" Lift, stock 02 DS IQ DIY
Hey guys I hope all is well.
Isn't there a way to do a 2" lift or so using the stock supspesion on a DS 02? Obiviously in the back you could just add blocks but in the front why cant you do the same thing? You would just add spacers/blocks to the front suspension were it ties in to the alum frame just pushing everything up? I'm just trying to do this on the cheap for this cart I wan't to flip. Thanks, Steve |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-28-2013, 08:50 PM | #2 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: 2" Lift, stock 02 DS IQ DIY
What about just 1" to the front and 2" to the back? I'm sure there is enough travel for the front shock? I'm talking about just pushing the leaf down 1" or so on the front? Why couldn't you just use some square tubing stock and drill it up?
Steve |
04-28-2013, 09:15 PM | #3 |
Gone Wild
Join Date: Jul 2012
Posts: 909
|
Re: 2" Lift, stock 02 DS IQ DIY
I added about 3/4 inch of lift using steel spacers and it has been fine. It cured my front tire rubbing too. Only thing is mine has a little rake cuz I have 20's in back with about 2-3 inch lift and the 3/4 lift in front running 18's. i like it though and solved some problems.
|
04-30-2013, 09:05 AM | #4 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: 2" Lift, stock 02 DS IQ DIY
Cant I just flip the rear axle also? this would gain 2 " in rear? Leafs would be on top of axle?
Steve |
04-30-2013, 09:38 AM | #5 |
Guest
Posts: n/a
|
Re: 2" Lift, stock 02 DS IQ DIY
when i watch a video on the 6" lift they had a plate and 2" block on the back that "fliped the axle" they also had a block in front spring
here is video.. it might help you |
04-30-2013, 09:46 AM | #6 |
Gone Wild
Join Date: Jul 2012
Posts: 909
|
Re: 2" Lift, stock 02 DS IQ DIY
Just get two a axel perches and some extended u bolts and put the rear spring over the top of the axel. I had my perches welded to the axel.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Looking for Yamaha "Drive" stock roof | Gas Yamaha | |||
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back | Lifted Golf Carts | |||
5" lift with stock tires? | Lifted Golf Carts | |||
limo stock tire height " clutch and gears?" | Gas EZGO | |||
12" wheels &/or 20" diameter tires on stock Yamaha | Electric Yamaha |