lifting a Pathway NEV

Kanyon · 05-08-2013, 09:17 AM

First time owning a cart (i find out it was a NEV Pathway)! So I decided to lift it 6" and install 14" wheels. Pictures to follow along the Path...way!

Kanyon · 05-08-2013, 09:20 AM

Remove the body for paint!

Kanyon · 05-08-2013, 09:21 AM

Kanyon · 05-08-2013, 09:23 AM

Front is done! Had to remove the front brakes.

Kanyon · 05-08-2013, 02:58 PM

The Paint!!!

Kanyon · 05-10-2013, 07:29 AM

Putting all back together! Close!!!

gcs13 · 05-10-2013, 08:44 PM

Your pathway is coming together nicely. I too lifted a pathway and repainted. I really like my cart. Have you did anything to boost power? I went completely through mine. I put 500 amp Altrax controller, D&D torque motor, 2 ga wires, and 400 amp cont. solenoid. By doing all the upgrades, it really brought my cart to life. Congrats on your build.

Kanyon · 05-12-2013, 09:38 AM

Almost, now just need accessories!

Kanyon · 05-12-2013, 09:41 AM

gcs13, thanks that is great info. I haven't got into any performance upgrades just yet. wanted to get the "look" first. Where did you you get your upgrades? I'm sure now that I got it looking the way I want, speed is next!!!

gcs13 · 05-12-2013, 07:38 PM

Quote:

Originally Posted by Kanyon

gcs13, thanks that is great info. I haven't got into any performance upgrades just yet. wanted to get the "look" first. Where did you you get your upgrades? I'm sure now that I got it looking the way I want, speed is next!!!

I first started with a plum quick bandit and I changed to a D&D torque motor. Where I go with my buggie, I needed more pulling power than speed. On level ground, I can still get 26 mph with my D&D motor. I have 23" inch tire on my pathway and those tall tires puts a strain on the factory setup ( motor, controller, solenoid, and battery cables ).
I bought my motor straight from D&D motors, the rest of my stuff came from buggies gone wild sponcers, eBay, and local dealers. Good luck with your upgrades.

05-08-2013, 09:20 AM	#2
Kanyon Not Yet Wild Join Date: May 2013 Location: Daytona Posts: 41	Re: lifting a Pathway NEV Remove the body for paint!

05-10-2013, 08:44 PM	#7
gcs13 Gone Wild Join Date: Sep 2010 Location: North Ga. Posts: 312	Re: lifting a Pathway NEV Your pathway is coming together nicely. I too lifted a pathway and repainted. I really like my cart. Have you did anything to boost power? I went completely through mine. I put 500 amp Altrax controller, D&D torque motor, 2 ga wires, and 400 amp cont. solenoid. By doing all the upgrades, it really brought my cart to life. Congrats on your build.

05-12-2013, 09:41 AM	#9
Kanyon Not Yet Wild Join Date: May 2013 Location: Daytona Posts: 41	Re: lifting a Pathway NEV gcs13, thanks that is great info. I haven't got into any performance upgrades just yet. wanted to get the "look" first. Where did you you get your upgrades? I'm sure now that I got it looking the way I want, speed is next!!!

Similar Threads
Thread	Forum
Pathway Mods	Electric Club Car
Lifting a Pathway?	Electric Club Car
Pathway Wiring	Electric Club Car
03 CC Pathway wont do anything	Electric Club Car
Pathway same as DS?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum