|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-11-2013, 02:52 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
2006 CC - New Pads - Slow - Smell
I just replaced the pads on my 2006 Presedent and after going through the auto adjustments I took it for a long drive. It feels like the brakes are dragging and I smell brake pad.
Is this normal? ( I am guessing not) Is there something I should do? Maybe reset the tension springs and start over? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-12-2013, 08:47 AM | #2 |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
Re: 2006 CC - New Pads - Slow - Smell
Yesterday we took it out for another spin and we had the same issue and our battery went down very fast.
Should both back tires spin freely when the cart is on jackstands and the parking brake is off? One of my tires spins with some resistance (pass side), the other (Driver Side) doesn't turn at all by hand. |
05-12-2013, 09:20 AM | #3 | |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: 2006 CC - New Pads - Slow - Smell
Quote:
|
|
05-12-2013, 09:43 AM | #4 |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
Re: 2006 CC - New Pads - Slow - Smell
I remember when I was pumping the brakes for self-adjustment that they just kept clicking and clicking and I felt like they should have already stopped ratcheting. So I put it back on the ground and started driving forward/back, hitting the brakes to get the ratcheting to start affecting the brakes and slowly the brakes began to get better until it finally stopped ratcheting and the brakes stopped very well, but maybe too well?
Is it possible to over auto-adjust them (oxymoron)? I guess I should check my brake cable but I haven't changed anything but the pads so I don't know if cables would need to be changed. When I put the pads in, I do remember wondering where the pads should align vertically inside the top/bottom bracket. I wasn't sure if the metal at the top of the pad mount surface should be flush with the top of the bracket slot, or if it should be centered vertically on that mount spot. Does the auto-adjust also auto-center the pads inside the drum? |
05-12-2013, 10:17 AM | #5 |
Gone Wild
Join Date: Jul 2008
Location: Slums of Lake Erie
Posts: 3,721
|
Re: 2006 CC - New Pads - Slow - Smell
Is your cable to tight?
|
05-13-2013, 08:12 AM | #6 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2006 CC - New Pads - Slow - Smell
Which brakes did you you and how did you install them? Pics? Upside down brakes can cause major problems and I see it all the time.
You should have used 101820301 Brakes and installed them with both markings upwards (17L and 17T) towards the top of the shoe. Only one marking will be visible because one shoe will be spun around and won't show it. 17L goes towards the rear of the car. 17T goes towards the front. This is the same on both the driver and passenger side. |
05-13-2013, 10:02 AM | #7 | |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
Re: 2006 CC - New Pads - Slow - Smell
Quote:
I used some pads that one of my neighbors had in-stock (new in the box). They are made in korea. I didn't see any 17 stamps on them (the old ones had them). I was desperate since I needed my cart this weekend and all the cart shops withing 50 miles are closed on weekends. As for the installation, I will be cracking it open again today to check on the installation and to lube/clean things up better. I will try to snap some photos. I was pretty careful to match up the pad orientation to the old pads, but its possible one of them is in there wrong. |
|
05-13-2013, 07:28 PM | #8 |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
Re: 2006 CC - New Pads - Slow - Smell
I am starting in on them again. Here are some pics of the driver side brake. I can't seem to upload more than 1 pic on my iPhone.
|
05-13-2013, 08:20 PM | #9 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 2006 CC - New Pads - Slow - Smell
Are all four of them the same?
|
05-13-2013, 08:52 PM | #10 |
Not Yet Wild
Join Date: Mar 2013
Posts: 12
|
Re: 2006 CC - New Pads - Slow - Smell
No, each set had one that had a dog ear. I matched up that dog ear with the old set for orientation.
I just re-assembled everything after cleaning and lubing. Both tires spin freely right now. I am going to begin the auto-adjustment. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2006 Precedent very slow to start | Gas Club Car | |||
2006 EZ GO ST Sport 2+2 Moves Slow | Electric EZGO | |||
2006 precedent slow | Electric Club Car | |||
help with slow running issues on 2006 txt pds model | Electric EZGO | |||
2006 Precedent runs slow. Is there a problem? | Electric Club Car |