|05-30-2013, 02:16 PM||#11|
Not Yet Wild
Join Date: Apr 2013
Re: noise from motor/diff
Just as a followup I put the bumper between the bottom of the motor shaft and the input shaft and the noise went away for a short time but came back at a lower level. When the motor centering kit came in I left the bumper between the shafts, added the washer spring and round washer with the bumper for the end of the motor shaft and the noise went away. It did concern me a little that I had to close up a 5mm gap between the motor and diff housing but that was due to the spring. I hope that this is not too much preload on the shaft or the motor bearing. Guess i will find out soon enought.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|g9 motor noise||Gas Yamaha|
|Worn spline on electric motor and diff||Electric EZGO|
|IQ motor noise||Electric EZGO|
|Can an Ez-Go axle w/motor/diff. fit in an 85 Yamaha||Electric Yamaha|
|Marketeer manual for electric motor and diff||Electric golf carts|