|06-09-2013, 06:34 AM||#1|
Not Yet Wild
Join Date: Mar 2013
Need advice on wiring a charger
Need some advice on this before I attempt it. I have heard it can be done and I have been searching this forum but cannot find exactly what I'm looking for.
I recently converted a 1993 CC DS from 36 to 48v. I was given (free) a DPI Power Force Series charger that had a round, 3 prong plug. My cart requires the crowsfoot. I have the crowsfoot plug and cable.
The crowsfoot cable has 2 wires (black and white). The charger has the additional red and white wires coming from what appears to be a sensor in the back of the charger.
Anyone ever done this? Where do I run the red and the white wire in side the charger? Any further re-wiring required?
Any help is appreciated.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|06-09-2013, 08:46 AM||#2|
Happy All Hallow's Eve
Join Date: Dec 2007
Location: Southern California
Re: Need advice on wiring a charger
DPI makes 2 versions of that particular charger.
One works with the CC OBC only
One is a stand alone charger.
You should figure out which one you have before you proceed.
Maybe a close inspection or quick search for the serial/model # will do it?
|Wiring advice||Big Block Talk!|
|Advice on wiring access. to a separate 12v battery||Electric Club Car|
|Charger Fried - New 36v Charger Advice Requested!||Electric Club Car|
|Advice on wiring headlights||Electric Club Car|
|HELP! Need advice with wiring a 36V Controller/HD Solenoid upgrade!!!!!!||Electric Club Car|