lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-21-2013, 05:22 PM   #1
Not Yet Wild
 
Join Date: Jun 2012
Posts: 18
Default resetting the obc on my 48v club car

the resetting instructions says to disconnect the negative cable on the far left side, i assume that is the main negative cable. then turn the key on, put selector knob in reverse position, lock down the throttle and in a few seconds the reverse buzzer will sound. wait about five minutes and then reconnect everything and the obc should be reset. my cart reverse buzzer does not sound when the negative cable is disconnected. i must be missing something here. need some help with obc resetting instructions.
rbgarst is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-21-2013, 05:40 PM   #2
Gone Wild
 
Fishing Dude's Avatar
Club Car
 
Join Date: Jul 2008
Location: Slums of Lake Erie
Posts: 3,722
Default Re: resetting the obc on my 48v club car

Does it sound when it is hooked up? Just leave ppeddle down for a minute, and then reconnect the cable will be okay.
Fishing Dude is offline   Reply With Quote
Unread 06-21-2013, 08:12 PM   #3
Not Yet Wild
 
Join Date: Jun 2012
Posts: 18
Default Re: resetting the obc on my 48v club car

yes, it sounds when it is hooked up. so, the obc will reset even if the reverse buzzer does not sound?
rbgarst is offline   Reply With Quote
Unread 06-21-2013, 08:15 PM   #4
Dazed & Confused
 
crash test dummy's Avatar
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 14,049
Default Re: resetting the obc on my 48v club car

reverse buzzer will go OFF

try again

Resetting the Club Car On board computer - reset the OBC

To reset the OBC the following must be done in this order:

If no Tow/Run Switch then skip that step

• Key Switch to Off
• Forward/Reverse to Neutral
• Tow/Run Switch to Tow
• Disconnect the Battery NEGATIVE (–) wire from the Battery Minus terminal on the battery pack.
• Put the Tow/Run to Run
• Forward/Reverse Switch to Reverse
• Key Switch to On
• Lock the throttle pedal down

The reverse buzzer will sound and go off in about 30 seconds.
Leave the cart like that for 5 min to cause the OBC to reset.

To reconnect the OBC back into the system:
• Key Switch to Off
• Forward/Reverse Switch to Neutral
• Tow/Run switch to Tow
• Reconnect the Batt – wire to the battery minus
terminal on the battery pack.
• Tow/Run switch to Run
• Key Switch to ON
crash test dummy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Resetting obc on 2001 club car Electric Club Car
Resetting OBC Electric Club Car
Resetting OBC Electric Club Car


All times are GMT -5. The time now is 10:37 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.