lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-30-2013, 12:02 PM   #11
Moderator
 
rib33024's Avatar
E-Z-GO
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 13,151
Default Re: In forward goes reverse

Quote:
Originally Posted by CartTrader View Post
Nope Cannot wire a resistor backwards! They are omni-directional. Now diodes can be wired backwards.

CartTrader
???


I didn't say anything about a resistor or diodes wired backwards!, not all solenoids have a resistor and diodes, they should in my book, but not all do. I said, you can't wire a solenoid backwards, as in the positive +, and negative - small wires, and the two high current cables, DC voltage solenoids are not polarity sensitive
rib33024 is online now   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-30-2013, 12:05 PM   #12
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: In forward goes reverse

Hopefully, this helps.
Attached Images
File Type: jpg Resistor & Diode 5-13.jpg (240.6 KB, 0 views)
scottyb is offline   Reply With Quote
Unread 06-30-2013, 12:12 PM   #13
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by scottyb View Post
Tell us what controller you are using and post the wiring diagram you are using. Otherwise everybody just grasping at straws .

It is a Curtis 1510-5201 controller out of a 2003 IQ cart.


CartTrader
Attached Images
File Type: jpg 2004 IQ diagram.jpg (184.3 KB, 0 views)
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 12:20 PM   #14
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: In forward goes reverse

good luck with that!~ the diagram is not user friendly

Maybe David, or somebody familiar with the Regen to IQ conversion will be able to help...
scottyb is offline   Reply With Quote
Unread 06-30-2013, 12:22 PM   #15
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by rib33024 View Post
???


I didn't say anything about a resistor or diodes wired backwards!, not all solenoids have a resistor and diodes, they should in my book, but not all do. I said, you can't wire a solenoid backwards, as in the positive +, and negative - small wires, and the two high current cables
Sorry quoted wrong post. Was telling cmalberto about resistor. my solenoid has both diode and resistor. I think on these you can wire the solenoid backwards as the diode has to be placed properly. Solenoid is marked + and -. Now without diode you can't wire backwards.

CartTrader
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 12:23 PM   #16
Gone Wild
 
Join Date: Jul 2012
Posts: 912
Default Re: In forward goes reverse

Even though you are using a curtis controller you could go to alltrax web site to get pin outs on 10 pin connection. 1 and 2 for throttle and 4 for reverse.
Speedchaser is offline   Reply With Quote
Unread 06-30-2013, 12:28 PM   #17
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: In forward goes reverse

This is the Alltrax pin-out diagram.
Forward pin 8 & Rev pin 16
Attached Images
File Type: jpg CC IQ.JPG (242.7 KB, 0 views)
scottyb is offline   Reply With Quote
Unread 06-30-2013, 12:33 PM   #18
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by scottyb View Post
good luck with that!~ the diagram is not user friendly

Maybe David, or somebody familiar with the Regen to IQ conversion will be able to help...
Not sure what you mean by not user friendly. It helped me connect all the wires in the new harness properly. According to David, when I started this project. The only difference between Regen II and IQ was the controller and Wiring harness. He did suggest adding the resistor. Everything else was compatable. And everything wired up and clipped into place. I did have to extend the solenoid low voltage wires as they were too short with where the solenoid was in the Regen system. I properly color coded them to make sure they went where schematic showed. Could the controller be bad? If so how could I check to make sure?

CartTrader
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 12:38 PM   #19
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by scottyb View Post
This is the Alltrax pin-out diagram.
Forward pin 8 & Rev pin 16

Checked wiring as per this schematic and it is hooked up the same. Didn't check forward pin 8 and rev pin 16
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 12:42 PM   #20
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

I just used the connections that was supplied with the new wiring harness from CC that I bought to connect to controller. I did replace the 10 gauge F1 and F2 wires with new 10 gauge wires. They needed to be 3" longer. I color coded them too.

CartTrader
CartTrader is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2006 ezgo forward is reverse and reverse is forward please help Electric EZGO
Reverse alarm sounds in Forward, wont go forward or reverse Electric Club Car
Reverse alarm stuck - motor won't run forward or reverse Electric EZGO
Alarm sounding in forward. No movement in forward or reverse Electric Club Car
Forward Reverse switch melted on forward...have question about replacement part Electric Club Car


All times are GMT -5. The time now is 09:03 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.