|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-29-2013, 10:45 PM | #1 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
In forward goes reverse
Just finished changing from 2001 Regen II to IQ. Changed controller and a new wiring harness and added a precharge resistor, Regen didn't have one. Wired everything up and when in Forward the reverse buzzer sounds and it goes in reverse. In reverse it still goes in reverse but no buzzer!! Checked and double checked wiring. Have gone over schematic over and over and am stumped!! Any suggestions? Thanks CartTrader
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-29-2013, 10:57 PM | #2 |
Gone Wild
Join Date: May 2013
Posts: 552
|
Don't have my all trax manual near me but when I was skimming the schematics it may have been for the regens but you switch the s1and s2 or the a1 a2 can't remember tho
|
06-29-2013, 10:58 PM | #3 |
Gone Wild
Join Date: May 2013
Posts: 552
|
Are micro switches correct
|
06-29-2013, 11:09 PM | #4 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: In forward goes reverse
Following the schematic. F1 on motor goes to S1 on controller and F2 goes to A2. What micro switches? I didn't change any. I now have an IQ cart!!
CartTrader |
06-30-2013, 04:07 AM | #5 |
Not Yet Wild
Join Date: Dec 2012
Location: Torquay Australia
Posts: 67
|
Re: In forward goes reverse
I had this problem when I fitted my alltrax, for some reason the previous owner had swapped the 2 smaller gauge wires at the motor, blue and orange, swapped back and all was good, hope that helps.
|
06-30-2013, 08:38 AM | #6 |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: In forward goes reverse
I thought I read somwhere that could be the result of wiring a Solenoid backwards. Sure you added the resistor in the correct direction too? Wishing I remembered where I read this...in just the last week or so.
I am doing my home work to basically do the same thing as you are doing. Interested in knowing the fix for this. |
06-30-2013, 08:59 AM | #7 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: In forward goes reverse
Quote:
|
|
06-30-2013, 09:53 AM | #8 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: In forward goes reverse
|
06-30-2013, 10:01 AM | #9 |
Gone Wild
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 889
|
Re: In forward goes reverse
I thought of that. More than color I also checked the schematic to make sure that F1 goes to S1 (orange) and F2 goes to S2 (blue) Also double checked to make sure that the F/R switch was wired correctly. Brown to terminal 1, orange to 2 and blue to 3. This really has me puzzled.
|
06-30-2013, 10:59 AM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: In forward goes reverse
Tell us what controller you are using and post the wiring diagram you are using. Otherwise everybody just grasping at straws .
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2006 ezgo forward is reverse and reverse is forward please help | Electric EZGO | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |