lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-29-2013, 11:45 PM   #1
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default In forward goes reverse

Just finished changing from 2001 Regen II to IQ. Changed controller and a new wiring harness and added a precharge resistor, Regen didn't have one. Wired everything up and when in Forward the reverse buzzer sounds and it goes in reverse. In reverse it still goes in reverse but no buzzer!! Checked and double checked wiring. Have gone over schematic over and over and am stumped!! Any suggestions? Thanks CartTrader
CartTrader is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-29-2013, 11:57 PM   #2
Gone Wild
 
Join Date: May 2013
Posts: 533
Default

Don't have my all trax manual near me but when I was skimming the schematics it may have been for the regens but you switch the s1and s2 or the a1 a2 can't remember tho
shaffer88 is offline   Reply With Quote
Unread 06-29-2013, 11:58 PM   #3
Gone Wild
 
Join Date: May 2013
Posts: 533
Default

Are micro switches correct
shaffer88 is offline   Reply With Quote
Unread 06-30-2013, 12:09 AM   #4
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Following the schematic. F1 on motor goes to S1 on controller and F2 goes to A2. What micro switches? I didn't change any. I now have an IQ cart!!


CartTrader
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 05:07 AM   #5
Not Yet Wild
 
Hornsta's Avatar
Yamaha
 
Join Date: Dec 2012
Location: Torquay Australia
Posts: 69
Default Re: In forward goes reverse

I had this problem when I fitted my alltrax, for some reason the previous owner had swapped the 2 smaller gauge wires at the motor, blue and orange, swapped back and all was good, hope that helps.
Hornsta is offline   Reply With Quote
Unread 06-30-2013, 09:38 AM   #6
Gone Wild
 
cmalberto's Avatar
Club Car
 
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
Default Re: In forward goes reverse

I thought I read somwhere that could be the result of wiring a Solenoid backwards. Sure you added the resistor in the correct direction too? Wishing I remembered where I read this...in just the last week or so.

I am doing my home work to basically do the same thing as you are doing. Interested in knowing the fix for this.
cmalberto is offline   Reply With Quote
Unread 06-30-2013, 09:59 AM   #7
Moderator
 
rib33024's Avatar
E-Z-GO
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 13,159
Default Re: In forward goes reverse

Quote:
Originally Posted by cmalberto View Post
I thought I read somwhere that could be the result of wiring a Solenoid backwards. Sure you added the resistor in the correct direction too? Wishing I remembered where I read this...in just the last week or so.

I am doing my home work to basically do the same thing as you are doing. Interested in knowing the fix for this.
you can't wire a solenoid backwards, that i know of
rib33024 is offline   Reply With Quote
Unread 06-30-2013, 10:53 AM   #8
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by rib33024 View Post
you can't wire a solenoid backwards, that i know of


Nope Cannot wire a resistor backwards! They are omni-directional. Now diodes can be wired backwards.

CartTrader
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 11:01 AM   #9
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: In forward goes reverse

Quote:
Originally Posted by Hornsta View Post
I had this problem when I fitted my alltrax, for some reason the previous owner had swapped the 2 smaller gauge wires at the motor, blue and orange, swapped back and all was good, hope that helps.
I thought of that. More than color I also checked the schematic to make sure that F1 goes to S1 (orange) and F2 goes to S2 (blue) Also double checked to make sure that the F/R switch was wired correctly. Brown to terminal 1, orange to 2 and blue to 3. This really has me puzzled.
CartTrader is offline   Reply With Quote
Unread 06-30-2013, 11:59 AM   #10
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,077
Default Re: In forward goes reverse

Tell us what controller you are using and post the wiring diagram you are using. Otherwise everybody just grasping at straws .
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
2006 ezgo forward is reverse and reverse is forward please help Electric EZGO
Reverse alarm sounds in Forward, wont go forward or reverse Electric Club Car
Reverse alarm stuck - motor won't run forward or reverse Electric EZGO
Alarm sounding in forward. No movement in forward or reverse Electric Club Car
Forward Reverse switch melted on forward...have question about replacement part Electric Club Car


All times are GMT -5. The time now is 07:16 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.