lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 07-01-2013, 01:03 PM   #1
Gone Wild
 
Join Date: May 2013
Posts: 533
Default Making batt cables

I think I'm going to end up making my own battery cable I going to use 2 gauge welding cable. But my question is what size starter rings do I put on the end of it. That way it fits over the battery terminals?
shaffer88 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 07-01-2013, 01:08 PM   #2
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: Making batt cables

5/16 holes will just fit right on batteries
CartTrader is offline   Reply With Quote
Unread 07-01-2013, 02:03 PM   #3
Gone Wild
 
Join Date: May 2013
Posts: 533
Default

ImageUploadedByTapatalk1372701771.284050.jpg
Would these work do I want just the copper ones without the tinned what benefits does the tin provide
shaffer88 is offline   Reply With Quote
Unread 07-01-2013, 02:07 PM   #4
Member #16,745
 
jakesnake27's Avatar
Harley Davidson
 
Join Date: Aug 2009
Location: Missouri
Posts: 9,862
Default Re: Making batt cables

Those look like they would work just fine, but I am no expert.
Scottyb is a battery cable expert, hopefully he sees this!
jakesnake27 is offline   Reply With Quote
Unread 07-01-2013, 02:33 PM   #5
Gone Wild
 
CartTrader's Avatar
Club Car
 
Join Date: Aug 2008
Location: Ohio-In Summer, Central Florida-In winter
Posts: 887
Default Re: Making batt cables

Quote:
Originally Posted by shaffer88 View Post
Attachment 87549
Would these work do I want just the copper ones without the tinned what benefits does the tin provide
Those will work just fine, if you are going to 2 gauge wire. Don't know the benefits of tinned but have heard they don't corrode as fast as straight copper.

CartTrader
CartTrader is offline   Reply With Quote
Unread 07-01-2013, 09:18 PM   #6
Getting Wild
 
Join Date: May 2013
Posts: 148
Default Re: Making batt cables

Usually tin connectors and bare wire just before you solder them. They may be pre treated.
anix is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Alltrax DCX400, adapter, solenoid & batt cables Golf Carts and Parts
Making battery cables Electric Club Car
Making 4 Gauge Cables Electric EZGO
Making all new battery cables? Electric Club Car
making new cables, IQ, which to replace? Electric Club Car


All times are GMT -5. The time now is 02:42 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.