|07-25-2013, 07:51 PM||#11|
Old Sky Soldier
Join Date: Dec 2011
Re: Rear end slip
I found my problem I thought I would post it here so that maybe someone else can learn from my mistake. Some time back I changed my battery cables to 4 gauge. I was very careful to change one at a time to ensure I never put one to the wrong place. When I changed the yellow one from the solenoid to the controller. I left the solenoid end loose so that I could move it around when changing the green, which connects the same place on the controller. A mater of routing out of the controller cover. Thing is I never tighten the nut on the solenoid for the yellow cable. It worked fine most of the time. The way I found the problem was the old saying. If something is not working go back to the last time you worked on it and recheck your work. Best troubleshooting tip I ever had. Hopefully someone will learn something from this.
Thanks for all the help you guys give.
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|Slip-Joint or Slip-Shaft for lifted carts?||Design Center|
|comet duster clutch and g9 rear end slip||Big Block Talk!|
|no slip||Gas Yamaha|
|Limited Slip kit for a Grazziano rear differential?||Gas Club Car|
|Rear limited slip diff||Lifted Golf Carts|