lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 08-23-2013, 11:43 AM   #1
Gone Wild
 
Storm S's Avatar
Club Car
 
Join Date: Aug 2013
Location: PBG, Florida
Posts: 247
Default White A2 Motor Wire Question

Again I would like to thank everyone for all of your help getting my first cart up and running. Again I am talking about a 1997 Club Car DS 48 Volt. I am in the middle of what I think is the last step needed to get this cart on the road. I am replacing the motor controller. I picked up a new one today and it is EXACTLY the same as the original but upgraded (i guess) to 400 amps rather then 300 amps (input on this as well please??)........... Here is the question..... There is a thick white wire that comes from the F/R controller in the front and another that comes from the A2 terminal of the motor. ORIGINALLY when I took the bad controller out yesterday both of these white wires were connected to the A2 terminal on the controller. Every diagram I have found shows this wire running straight thru and NOT connected to the controller at all. In fact in the diagrams it shows the controller only having three large terminals not four. Is this the way it should be or could it be the reason the old controller was smoking? Thank you and I hope to have this cart moving today.
Storm S is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 08-23-2013, 11:56 AM   #2
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 9,826
Default Re: White A2 Motor Wire Question

The fourth terminal indicates that the controller supports plug-braking, hook it up the way it was.
cgtech is online now   Reply With Quote
Unread 08-23-2013, 12:11 PM   #3
Gone Wild
 
Storm S's Avatar
Club Car
 
Join Date: Aug 2013
Location: PBG, Florida
Posts: 247
Default Re: White A2 Motor Wire Question

Quote:
Originally Posted by cgtech View Post
The fourth terminal indicates that the controller supports plug-braking, hook it up the way it was.
Thank you CGTECH!
Storm S is offline   Reply With Quote
Unread 08-23-2013, 12:37 PM   #4
Gone Wild
 
Storm S's Avatar
Club Car
 
Join Date: Aug 2013
Location: PBG, Florida
Posts: 247
Default Re: White A2 Motor Wire Question

Its alive!
Storm S is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
White Wire Gas EZGO
White wire in turn signal wiring Electric Club Car
Black & White Wire Electric Club Car
Electrical question - mysterious white wire Gas EZGO
White/Red Wire Question 48v PDS Electric EZGO


All times are GMT -5. The time now is 07:37 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.