lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 12-04-2013, 05:08 AM   #11
Not Yet Wild
 
Join Date: Nov 2013
Posts: 11
Default Re: Help with 06 CC Precedent Motor!

Wow thanks! That's great advice and is much appreciated!
5point9 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 12-05-2013, 05:25 AM   #12
Not Yet Wild
 
Join Date: Nov 2013
Posts: 11
Default Re: Help with 06 CC Precedent Motor!

Ok so cap is off. I am confused.. does that piece ride/hold the back side of the bearing "against" the cap to prevent it from going into the motor? Or does it ride on the OD of the bearing and allow support?

Also, (I should of left all of this alone!), when I took the magnet off, the "plastic" part of the magnet broke off leaving the "metal" ridged part still on the shaft. Anyone have this issue before? I can't seem to pry it off and don't want to damage the motor shaft.

Lastly, there has to be an alternate (cheaper) way to buy the "speed magnet". I'm sure these people are custom making these magnets. I see Phoenix Magnets has some magnets, anyone find a match for the GE motor? Is the stock magnet 8 pole and the speed magnet 4 pole?

Thanks
5point9 is offline   Reply With Quote
Unread 12-05-2013, 06:43 AM   #13
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,566
Default Re: Help with 06 CC Precedent Motor!

I don't have a GE motor, but looking at the picture attached, it appears the bearing retainer keeps the bearing from sliding into the brushes assembly.
Phoenix America makes the magnets, everyone else resell them likely at a higher price.
If you have a vernier caliper, measure the OD, ID and thickness of the magnet, they may have one that fits. I know you already have one, but the information will help someone else in the future.
The factory magnet is 8 pole and the speed magnet is 4 pole.
good luck.
Attached Images
File Type: png ge_motor_endshield.png (50.1 KB, 0 views)
Sergio is online now   Reply With Quote
Unread 12-05-2013, 07:27 AM   #14
Not Yet Wild
 
Join Date: Nov 2013
Posts: 11
Default Re: Help with 06 CC Precedent Motor!

Perfect! Thanks for the pic.. this board has helped a lot!

Now I just have to get the old magnet ring off. Yes, I will do some measuring and get back with everyone on what the size is and what magnet I end up ordering or ends up working!

Thanks
5point9 is offline   Reply With Quote
Unread 12-05-2013, 09:23 AM   #15
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 7,966
Default Re: Help with 06 CC Precedent Motor!

Use a bearing puller to pull the bearing off. It'll bring the magnet hub off with it straight as an arrow. Afterwards you may either press (if you have access to a hydraulic press) or tap the bearing back onto the shaft. Be careful not to damage the bearing while tapping.
TahoeDawgZ71 is offline   Reply With Quote
Unread 12-10-2013, 11:33 AM   #16
Not Yet Wild
 
Join Date: Nov 2013
Posts: 11
Default Re: Help with 06 CC Precedent Motor!

Wow, got it back together. What a pain. I had to CAREFULLY dremel the bushing ID off the motor shaft. Once the material got thin enough it allowed me to easily remove it. What a pain. And trying to get the two screws back it was even worse. What a dumb mistake.

For what it's worth, Phoenix can make a 4 pole magnet for the GE motor, but they don't make it on a regular basis. As a result, the sales engineer said it would be 40-50 each to make a small lot of them (2-4 pcs).

So, at 39.95 it will be cheaper to get off of ebay.. too bad..

Oh well, thanks all!
5point9 is offline   Reply With Quote
Reply

Tags
precedent 06 speed sensor
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Precedent with Motor upgrade ??? Extreme DC!
Why not just swap a 48v motor for a 36v on my Precedent? Electric Club Car
Precedent I2 Motor Questions Electric Club Car
Motor or Controller Precedent ? Electric Club Car
Precedent Motor Electric Club Car


All times are GMT -5. The time now is 01:08 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.