lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 06-09-2007, 04:20 PM   #21
Gone Wild
 
tungpo1's Avatar
E-Z-GO
 
Join Date: Dec 2006
Location: St. Johns /Jacksonville
Posts: 2,383
Default

Soon as you press the pedal you should hear the MCOR click if not there is an adjustment from the MCOR to the pedal
tungpo1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 06-10-2007, 11:19 AM   #22
Not Yet Wild
 
carrollclay's Avatar
 
Join Date: May 2007
Location: Chesterfield, VA
Posts: 48
Default Re: I GOT IT!

That adjustment procedure is what I am looking for. Hopefully I will be able to fix it with that.
carrollclay is offline   Reply With Quote
Unread 06-26-2007, 07:09 PM   #23
Gone Wild
 
Join Date: Jan 2007
Posts: 382
Default Re: I GOT IT!

problem solved?
2stroke is offline   Reply With Quote
Unread 06-26-2007, 10:05 PM   #24
Not Yet Wild
 
carrollclay's Avatar
 
Join Date: May 2007
Location: Chesterfield, VA
Posts: 48
Default Re: I GOT IT!

No, not fixed yet. I think I may have to take it somewhere. I don't know if I lost a bushing or something? Even though it doesn't feel like much, I guess there is just a little too much play in the linkage. I have looked underneath the cart and had someone else press the pedal and the rod going into the MCOR doesn't start to twist until the pedal is about 1/2 way down.

I have played with the nut at the end of the pedal/spring assembly under the cart. That didn't change much. I can't figure it out??? Unfortunatly I don't have anything to compare to.

Any suggestions?
carrollclay is offline   Reply With Quote
Unread 07-01-2007, 11:47 AM   #25
Not Yet Wild
 
carrollclay's Avatar
 
Join Date: May 2007
Location: Chesterfield, VA
Posts: 48
Default Re: I GOT IT!

Maybe posting some pics will help??? Anyone have ANY suggestions???

Pic from directly under accelerator pedal

Pic from the rear of the accelerator linkage

The backend of the acceleratory linkage

The front of the accelerator linkage

Pic coming from the driver's side showing the brake pedal linkage that connects with the accelerator linkage
carrollclay is offline   Reply With Quote
Unread 07-01-2007, 12:01 PM   #26
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,912
Default Re: I GOT IT!

Measure the voltage on the yellow wire on the controller while pushing the pedal, I think it should read somewhere around 7.5 Volts full throttle. Then if possible just turn the shaft that goes ito the MCOR and measure again. We should be able to eliminate the linkage or the MCOR this way. Jack the cart up and put it on jackstands and maybe even take the rear wheels off. All that stuff looks good but you didn't get a pic of where the rod goes into the MCOR.

I'm gonna try and find an exploded diagram of all that throttle linkage.
roady89 is offline   Reply With Quote
Unread 07-01-2007, 09:36 PM   #27
What the.....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 11,365
Default Re: MCOR throttle linkage adjustment?

Try this...

From my '07 parts book!
Attached Images
File Type: jpg 07 Elec.Throttle Linkage.jpg (29.9 KB, 95 views)
lockman1 is online now   Reply With Quote
Unread 07-01-2007, 10:36 PM   #28
Not Yet Wild
 
carrollclay's Avatar
 
Join Date: May 2007
Location: Chesterfield, VA
Posts: 48
Default Re: MCOR throttle linkage adjustment?

lockman! Thanks, that's exactly what I need. I'll let you know when I get the bearings replaced.
carrollclay is offline   Reply With Quote
Unread 07-01-2007, 11:00 PM   #29
What the.....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 11,365
Default Re: MCOR throttle linkage adjustment?

a better veiw!

lockman1 is online now   Reply With Quote
Unread 07-01-2007, 11:17 PM   #30
What the.....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 11,365
Default Re: MCOR throttle linkage adjustment?

Part Numbers???


Last edited by lockman1; 07-01-2007 at 11:21 PM..
lockman1 is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 01:08 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.