|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-02-2013, 09:19 PM | #1 |
Not Yet Wild
Join Date: Sep 2013
Posts: 8
|
New to forum....alltrax question
Ive learned a lot from y'all on here so far and now I need some help.
I've got a 09 precedent, 6" madjax lift, 23" tires. I've just added a alltrax dcx600iq controller with a advanced 7hp motor. Cart runs good and has great power and torque. Of course, at top settings I was running 34 mph by GPS so I turned it down to run around 25. My problem is #1, when in reverse it spins the wheels no matter what you do. The dealer said the have the " half reverse speed" on but that its the gears. #2 problem is the same in forward only it does not spin wheels. My question is this, is it easy to adjust programming in the controller by me or is it best to be done a the dealer? I've researched this and thing with some changes in programming I can make this cart exactly what I wanted which is basically a "soft start" motor. (I also have a 9 year old and a wife who are not happy with the cart). I downloaded the alltrax software and have the cable. I'm just wanting to hear if anyone has had this issue and if they have fixed it their self. The dealer said this is normal and cannot be changed. However it can be changed, they just don't know how. Please help. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2013, 09:27 PM | #2 | |
Gone Wild
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
|
Re: New to forum....alltrax question
Quote:
I am sure you get other valuable feedback from others have been through what you are going through. Where did you get the your motor from? Just curious. Keep us updated as to what your results are. |
|
09-02-2013, 09:52 PM | #3 |
Not Yet Wild
Join Date: Sep 2013
Posts: 8
|
Re: New to forum....alltrax question
The motor and controller were installed at a local dealer in middle ga. I am happy with everything except the initial throttle response. I am calling alltrax tomorrow.
|
09-03-2013, 09:26 AM | #4 |
Gone Wild
Join Date: Jul 2012
Posts: 366
|
Re: New to forum....alltrax question
You should be able to turn the starting power from 15 down to 2 or 3
|
09-03-2013, 10:11 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: New to forum....alltrax question
Simply select a lower throttle up rate in the program if it's on 5 go to 4 or even 3
When you get done teach your dealer how. |
09-03-2013, 12:48 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 12,997
|
Re: New to forum....alltrax question
|
09-04-2013, 06:26 AM | #7 |
Not Yet Wild
Join Date: Sep 2013
Posts: 8
|
Re: New to forum....alltrax question
Got it fixed! Turned down to 3 and 1/2 speed reverse. Time to take it hunting now.
|
09-04-2013, 06:34 AM | #8 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: New to forum....alltrax question
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
alltrax question | Electric EZGO | |||
PQ and Alltrax question | Electric Club Car | |||
Alltrax 500 question | Electric EZGO |