Forward Reverse replacement switch not same

ajm555

I want to replace the original forward reverse switch on my '97 Club Car DS 48V but the replacement wiring is different. They both have the same amount of wires but are configured differently. The original has has 3 wires across the top and 3 wires under that row. The replacement has 2 on top and 2 below with 3 wires stubbed out between them. Can any one tell me which wire goes where?

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

ajm555

To be clear, I'm talking about the micro switch(s) attached to the F/R S.
It appears to be 3 micro switches but are in different arrangement.

scottyb

this may help

Attached Images

CC HD F&R instruction.jpg (111.7 KB, 0 views)

ajm555

Yes, thanks, that is the switch that is on the cart now. The new switch is different. I thought I may have received the wrong replacement but I can't find anything like the original.

ajm555

Ok. So, if you just can't figure out how to wire the micro switches on the replacement F/R switch use the old micro switches on the new F/R switch. They fit right up.