|09-08-2013, 03:39 PM||#1|
Join Date: Dec 2010
Help ! Using an OBC on a desk charge setup
I have a Precedent OBC that I want to use for charging a spare set of batteries. I have connected the 16g to the battery( -) the neg. lead from the charger receptacle to the where the 16g would have joined the controller B-, the + from receptacle to battery +, the sense lead to the spade connector on the OBC and the red wire from the 6 pin plug to the battery +. There is a black 10g wire that comes out of the OBC with a spade connector that seems to have gone to the controller so I left that unconnected. When I plug in the charger the relay closes, the charger hums but the amp meter remains at 0. Either the OBC is shot or maybe other wires from the 6 pin plug need bridging. Any guidance would be appreciated. The charger is ok as I use it on my series cart.
Last edited by Golfdog; 09-08-2013 at 03:45 PM.. Reason: additional info
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|For a 48v setup, are 12v any better than 8v batts?||Electric Club Car|
|Anybody ever done this setup?||Big Block Talk!|
|hey scotty ! FI setup||Big Block Talk!|
|98 ezgo charge meter not showing actual charge||Electric EZGO|