lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 09-10-2013, 09:08 PM   #1
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Voltage on frame

What would cause this?? I have take the pack loose from the solenoid and the voltage is this present. I have removed the wires from the motor and retested and the voltage is still there. I removed the whole pack, cleaned the tray, batteries and cables, reinstalled, and the voltage is still there. What is my next step? After I fix it, it will be up,for sell! Haha
white rice is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 09-10-2013, 09:24 PM   #2
Gone Wild
 
Sergio's Avatar
Club Car
 
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 4,581
Default Re: Voltage on frame

Voltage reducer bolted to the frame??
Sergio is offline   Reply With Quote
Unread 09-10-2013, 10:05 PM   #3
Dazed & Confused
 
crash test dummy's Avatar
Club Car
 
Join Date: Nov 2011
Location: Z-HELLS FL
Posts: 14,035
Default Re: Voltage on frame

check behind the dash for wire on frame
crash test dummy is offline   Reply With Quote
Unread 09-10-2013, 10:52 PM   #4
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 2,681
Default Re: Voltage on frame

Voltage relative to what and how much???? Explain how you measured it.
Volt_Ampere is offline   Reply With Quote
Unread 09-11-2013, 08:07 AM   #5
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Voltage on frame

Sorry guy that was a bit vague. I have about 35vdc on the frame. I tested from b- on alltrax to frame. Alltrax is getting crazy temp readings causing it to stop working. Alltrax tech support told me to voltage on frame would cause it. I found there to be voltage.
white rice is offline   Reply With Quote
Unread 09-11-2013, 07:24 PM   #6
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Voltage on frame

Can the obc cause this issue? im not really sure what the obc does, or, how i would troubleshoot it?

Last edited by white rice; 09-11-2013 at 07:26 PM.. Reason: spelling
white rice is offline   Reply With Quote
Unread 09-11-2013, 08:53 PM   #7
Gone Wild
E-Z-GO
 
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 206
Default Re: Voltage on frame

with the voltage readings u r getting i would check ur lights or horn or anything hooked from ur 3rd battery on
pete959 is offline   Reply With Quote
Unread 09-11-2013, 09:40 PM   #8
Gone Wild
Club Car
 
Join Date: Mar 2011
Posts: 441
Default Re: Voltage on frame

I understand there are not to be any electrical grounds made to the frame. You might check to see that all of your accessories are grounded to the pack or to a buss bar grounded to the voltage reducer and none are made directly to the frame. Check for continuity between the frame and your packs ground.
beau is offline   Reply With Quote
Unread 09-12-2013, 08:58 AM   #9
Gone Wild
 
white rice's Avatar
Club Car
 
Join Date: Apr 2009
Location: Tifton, GA
Posts: 165
Default Re: Voltage on frame

Pete, i think i will do just that. I believe my lights are connected to the 3 and4 battery. They are wired for 16v. I am going to remove them this afternoon, however, i am getting around 30v. Beau, i will check that also. Thanks
white rice is offline   Reply With Quote
Unread 09-12-2013, 10:55 AM   #10
Gone Wild
 
simple man's Avatar
E-Z-GO
 
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
Default Re: Voltage on frame

You could have a partial short in your motor windings. Carefully remove the cables from the motor ( make sure to hold the bottom nut so the studs don't turn ), and test each stud to the case for a partial short. This may be your heating problem too!
simple man is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Voltage on frame. Electric EZGO
88 Ez go has voltage on the frame Electric EZGO
Voltage on frame---normal or not? Electric Club Car
voltage on frame??? Electric Club Car
87 ezgo voltage leaking to frame, I think? Electric EZGO


All times are GMT -5. The time now is 05:56 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.