lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-19-2013, 07:57 PM   #1
cmalberto
Gone Wild
 
cmalberto's Avatar
Club Car
 
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
Default Bad OBC after programming Alltrax controller? possible?

Dang it....Maybe a coincidence...I tweeked the programming in my Altlrax Controller last Saturday. I was successful in adding the plug break to give some breaking when I let off the goPedal. For whatever reason, I forgot to plug into the charger. Note that it worked the day before and even that morning.

So here I am today, saw it not plugged and did so. Nada, nothing. I checked the power to the plug and confirmed the breaker was tripped. So I am wondering if I may have done something when programming the controller or dumb luck.

So now it is troubleshooting time. OBC suddenly go bad, something else? If I remember right, there is a couple of ways that you can bypass the OBC and determine if that is bad.

One way was to jump the charger from point to point - not sure where that post was that I read and can't seem to find it. Then there was something else I thought I read that would let you bypass the OBC directly.

Probably to soon to ask about OBC replacement vs. buying one of the fancier chargers that has all the smarts built in. Probably a cost trade off and or preference any ways.

So if someone could point in the right direction...would appreciate it(as always).
cmalberto is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-19-2013, 08:09 PM   #2
rib33024
......................
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
Default Re: Bad OBC after programming Alltrax controller? possible?

how about we start off with the pack volts , do you have a friend with another charger you can try to see if that is it, you can try a OBC reset, and yes you can bypass the OBC, there is alot of things to try, start with the easy stuff first, when is the last time you charged the cart?
rib33024 is offline   Reply With Quote
Old 09-19-2013, 08:15 PM   #3
cmalberto
Gone Wild
 
cmalberto's Avatar
Club Car
 
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
Default Re: Bad OBC after programming Alltrax controller? possible?

Quote:
Originally Posted by rib33024 View Post
how about we start off with the pack volts , do you have a friend with another charger you can try to see if that is it, you can try a OBC reset, and yes you can bypass the OBC, there is alot of things to try, start with the easy stuff first, when is the last time you charged the cart?
Charged Saturday. Pack voltage is at 50.4. Yea..I can do the reset of the OBC first. pretty simple to do.
cmalberto is offline   Reply With Quote
Old 09-20-2013, 04:16 AM   #4
Stevegrmich
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
Default Re: Bad OBC after programming Alltrax controller? possible?




Stevegrmich is offline   Reply With Quote
Old 09-20-2013, 05:23 AM   #5
cmalberto
Gone Wild
 
cmalberto's Avatar
Club Car
 
Join Date: Jun 2013
Location: Beaumont, Texas
Posts: 154
Default Re: Bad OBC after programming Alltrax controller? possible?

Thanks Steve - what size wire to jump the OBC on the cart?

I'll take the charger to the place I bought the cart from to try on another cart to test that.

Jumping the charger? I assume same size wire? Is that a fused(15) black to white jump here to test for a bad breaker?

This is exactly what I was looking for.
cmalberto is offline   Reply With Quote
Old 09-20-2013, 06:06 AM   #6
Stevegrmich
Medicare Recipient
E-Z-GO
 
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
Default Re: Bad OBC after programming Alltrax controller? possible?

Quote:
Originally Posted by cmalberto View Post
Thanks Steve - what size wire to jump the OBC on the cart?

12g should be ok . .

I'll take the charger to the place I bought the cart from to try on another cart to test that.

Jumping the charger? I assume same size wire? Yes

Is that a fused(15) black to white jump here to test for a bad breaker? Yes

This is exactly what I was looking for.
. . .
Stevegrmich is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car




Similar Threads
Thread Forum
Programming Alltrax controller question Electric EZGO
Controller (Alltrax) Programming tips Electric Club Car
Alltrax Controller Programming for Precedent Electric Club Car
Programming alltrax controller Electric EZGO
what is the best programming for an alltrax controller Electric EZGO


All times are GMT -5. The time now is 07:53 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.