09-23-2008, 11:20 AM | #1 |
Not Yet Wild
Join Date: Sep 2008
Location: Cincinnati oh.
Posts: 6
|
missing 1st speed
Recently Aquired A 1980 C C Not Running,they Had Installed A Newer Rnf Control 83 And Up .i Found Wiring Diagrham To Switch Wiring And Did So But Am Missing Slow Or Creep Speed Making Cart Jump When Taking Off Replaced 1st Solnoid With New One. Same Problem Solnoid Clicks But No Power On Large Termials Untill 2nd Solnoid Clicks In.all Micro Switches Checks O.k. Also Is Ign. Switch Postive Or Neg. Can Find No Reference To 1980 Cars Only 75 To 79 Or 81 T0 83. Any Ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-23-2008, 11:37 AM | #2 |
Gone Wild
Join Date: Jul 2008
Location: Michigan
Posts: 192
|
Re: missing 1st speed
If its a 5 sol cart, the first one is just a master and wont apply power to the motor. In other words, you only have 4 speed sol starting with the second one.. I think thats what your after?
|
09-23-2008, 11:54 AM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: missing 1st speed
yes cuz is right you replaced the master so put the one you took off next to it and see what happens......depending on how bad the jerk is its possible you have more than one bad one............................
|
09-23-2008, 11:55 AM | #4 |
Not Yet Wild
Join Date: Sep 2008
Location: Cincinnati oh.
Posts: 6
|
Re: missing 1st speed
Thanks For This Info. I Think I Will Take A Closter Look At The Resistors ,one Was Broken And Welded Back,this May Account For The Jerky Takeoff.
|
09-23-2008, 11:57 AM | #5 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: missing 1st speed
thats possible so you,ll need to replace it with an exact match...........
|
09-23-2008, 11:59 AM | #6 |
Not Yet Wild
Join Date: Sep 2008
Location: Cincinnati oh.
Posts: 6
|
Re: missing 1st speed
Thanks Tom,i Tested Each Solnoid They All Tested Fine,even The One I Replaced With A New One.
|
09-23-2008, 12:00 PM | #7 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: missing 1st speed
how about the micro switches? follow the small wires from solenoids they will lead you to the micros.............................
|
09-23-2008, 12:02 PM | #8 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: missing 1st speed
Welcome to the forum exupser....................
|
09-23-2008, 12:04 PM | #9 |
Not Yet Wild
Join Date: Sep 2008
Location: Cincinnati oh.
Posts: 6
|
Re: missing 1st speed
Have Tested All Micro Switches ,they As They Should.
|
09-23-2008, 12:05 PM | #10 |
Not Yet Wild
Join Date: Sep 2008
Location: Cincinnati oh.
Posts: 6
|
Re: missing 1st speed
Thanks For The Welcome Rusty Glad To Be Aboard.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Need some SPEED | Lifted Golf Carts | |||
more speed | Gas Club Car | |||
Need more speed out of G2! | Electric Yamaha | |||
More Speed | Electric Club Car |