Took Body off, now won't go

Jspang

Hey everyone, I'm doing an overhaul on my golf cart and I took the body parts off to paint them. I disconnected everything from the charger where it goes through the front of the back body. Then disconnected the main battery cable and then another red cable underneath the rear access panel.

I installed a lift kit/tires and did some frame repair over about a month. I never ran the cart or charged it. I finally finished painting and put the body back on, connected everything back to where it was (used colored electrical tape to match connections so I didn't mess it up). Charged the cart overnight and when I tried it in the morning it wouldn't go anywhere. It just made a click sound and nothing. It made the buzz sound in reverse. When I lifted the back so the tires could spin freely it maybe did a rotation and a half and then quit. It wouldn't spin at all in reverse.

Any ideas?! I'm at a complete loss.

I attached a pic to show my progress, but it's all worthless if I can't move!

Thanks!

Attached Images

IMG_5610.jpg (141.7 KB, 0 views)

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

CCFanatic

I would check the wires that plug into the FR switch. Could have been easily pluged in the wrong port on the switch

mrgolf

It don't take much of an arc to blow the controller. Just my guess.

Jspang

Unbelievably a wire in the controller box (which I never touched) came unplugged. Fixed it right up! haha, amazing...

Thanks for the responses y'all.

CCFanatic