lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-04-2013, 12:04 AM   #1
Not Yet Wild
 
Join Date: May 2010
Posts: 1
Question Ingrid

Hi, I bought a used 85 club car it has the model 101290 motor and the 5 speed limit switches in a box. Batteries are fully charged and when gas pedal is pressed you hear a click, click, click, click from the solenoids and resistor, but the motor will not come on. I checked wiring by your diagrams but this motor has 4 posts that are separated 2 in front and 2 toward the back side, not in a row, the front has the red and black hooked to the F & R switch and the back 2 are hooked--1 to solenoid and the other to NEG. post. I still get nothing from motor ANY THOUGHTS ON THIS? Thank you in advance! I don't have a clue!
ingrid is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-04-2013, 09:01 AM   #2
Gone Wild
 
Budule's Avatar
Club Car
 
Join Date: Sep 2010
Posts: 488
Default Re: Ingrid

Well we would need the pack voltage at rest, then when you hit go (you need a volt meter for this.....cheapie will work).....also you can jack up the rear wheels (very important) and "bump over" (screw driver and cross the two big post on top) of the main solenoid ( the one without the coils)
Budule is offline   Reply With Quote
Unread 11-04-2013, 10:07 AM   #3
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: Ingrid

Your cart has 4 'speed' solenoids and one master. The master may not be working. It is the solenoid on the far drivers side of the cart. If you determine the solenoid is not working then determine if the activation circuit or the solenoid coil has failed
All testing should be done with one wheel jacked up off the floor .
scottyb is offline   Reply With Quote
Unread 11-04-2013, 10:48 AM   #4
Gone Wild
 
Budule's Avatar
Club Car
 
Join Date: Sep 2010
Posts: 488
Default Re: Ingrid

Quote:
Originally Posted by scottyb View Post
All testing should be done with one wheel jacked up off the floor .
I'm thinking both wheels off groung just in case somebody had the welder out on the rear end.....not likely on that cart but a good practice none the less......
Budule is offline   Reply With Quote
Unread 11-04-2013, 11:08 AM   #5
Cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 64,042
Default Re: Ingrid

Nobody can say guarding against the 1 in 100,000 chance is a bad idea. but as a service tech I never came across such a cart.
scottyb is offline   Reply With Quote
Unread 11-04-2013, 11:44 AM   #6
Gone Wild
 
Budule's Avatar
Club Car
 
Join Date: Sep 2010
Posts: 488
Default Re: Ingrid

Quote:
Originally Posted by scottyb View Post
Nobody can say guarding against the 1 in 100,000 chance is a bad idea. but as a service tech I never came across such a cart.
true, but if she's out there, I have the uncanny ability to find her.......with odds way worse than that......
Budule is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes



All times are GMT -5. The time now is 02:28 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.