|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-18-2013, 07:30 PM | #1 |
Not Yet Wild
Join Date: Jul 2008
Location: Jacksonville, Fl
Posts: 32
|
'99 stopped in motion
Hello,
I was wondering if you could help me with some motor consulting. I have a 1999 36v resistor club car. It has a ge motor and stopped running while in motion. Using the service manual, all tests checked out except for the stator check. The service manual states to disconnect the batteries and test for continuity between battery post 6 and brown wire at F/R switch. Of coarse this can’t be so I connected the batteries and showed NO continuity. The brushes and springs are good and no evidence of shorts. Jumping the terminals will run the motor. The switches - key,throttle,f&r,v-glide, and solenoid are testing good and get 37 volts to motor. Batteries are charged and good. Completely stumped...please help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-18-2013, 08:34 PM | #2 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
If u have 37 volts at the motor then there has to be something wrong with the motor unless I am missing something in your description of what u have checked. The brushes may look fine but that doesn't mean they are working properly.
Sent from my iPhone using Tapatalk |
11-18-2013, 09:22 PM | #3 |
Not Yet Wild
Join Date: Jul 2008
Location: Jacksonville, Fl
Posts: 32
|
Re: '99 stopped in motion
forget getting voltage to motor. When I put a meter across A2 and S2 I'm not getting anything. I first tested S2 to positive on battery bank.
|
11-19-2013, 06:59 AM | #4 | |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: '99 stopped in motion
Quote:
Bench Testing Series Motor Remove all cables from the motor; connect a jumper from A1 to S1. Connect 12 to 24 volts, positive @ A2 and negative @ S2. Swap S1 and S2 to change rotation direction. Do not allow motor to run but a brief time without load. NOTE: If motor in cart, raise wheels off ground |
|
11-19-2013, 08:25 AM | #5 |
Not Yet Wild
Join Date: Jul 2008
Location: Jacksonville, Fl
Posts: 32
|
Re: '99 stopped in motion
Wheels off the ground, jumped 1's and powered 2's. Motor does turn. What would be the next step?
|
11-19-2013, 10:12 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: '99 stopped in motion
series motor test
|
Tags |
motor, problem, resistor |
|
|
Similar Threads | ||||
Thread | Forum | |||
Batteries sparking while in motion | Electric EZGO | |||
36 Volt CC jerky motion | Electric Club Car | |||
Alarm w/ Motion Sensor | Electric EZGO | |||
Uh oh! No motion! | Electric EZGO | |||
Charges?? in motion. | Electric EZGO |