|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-02-2014, 11:33 AM | #1 |
Not Yet Wild
Join Date: Nov 2013
Posts: 8
|
Installing a reducer in a Precedent
Looking for ideas to come up with a great location to install a 48v to 12v reducer in my precedent... As well as some advice for the install, I plan to wire it to a fuse block but that is about as far as I have gotten. My knowledge on the wiring subject is limited but I do have a good understanding of how it works. I would just like to do it all the proper way the first time...
I have tried to search but there are only a few posts regarding a precedent and I'm looking for more info on the subject. Any info is welcome! Thank you!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-02-2014, 12:35 PM | #2 |
Gone Wild
Join Date: Feb 2010
Location: Florida
Posts: 184
|
Re: Installing a reducer in a Precedent
Check these two posts. They may help.
http://www.buggiesgonewild.com/elect...e-reducer.html http://www.buggiesgonewild.com/elect...i-reducer.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
No tail lights after installing reducer | Electric Club Car | |||
Installing Madjax 36 to 12 volt reducer | Electric EZGO | |||
Installing lights on a 48v Precedent.. | Electric Club Car | |||
Need help installing voltage reducer | Electric EZGO | |||
installing a radio on a precedent. | Electric Club Car |