lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars

Post New Thread  Reply
Thread Tools Display Modes
Unread 01-13-2014, 08:24 AM   #1
Not Yet Wild
Join Date: Jan 2014
Posts: 1
Default IQ cable kit

I recently upgrade my IQ cart to a 500 amp control and wanted to upgrade my cables to 4 GA. I wanted to do it myself to save some money. What are the lengths of the cables that I am going to need?

nfootball19 is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Unread 01-13-2014, 08:36 AM   #2
Gone Wild
Club Car
Join Date: Aug 2013
Posts: 262
Default Re: IQ cable kit

Nate, I will promise you that the money you think you will save in doing the kit yourself will end up costing you in the long run. Cheap cable is less electricity, more resistance and corrosion. Not to mention the time. ScottyB and other sponsors have great kits.

I had a local dealer do it for me and I could still kick myself in the rear for it. It was cheaper, and is is poor. I really regret it. It is not even what I asked for. That is probably the reason it was cheap. I asked for 4 ga to be put it and even the connectors are less than expected. When you pay for a new set of batteries, you think you would get good service.

Do it right the first time. It will last much longer and it will be what you need.

I wish I had gone to King of Carts here in town to start with.
RPatten is offline   Reply With Quote
Unread 01-13-2014, 08:46 AM   #3
Gone Wild
sunoco's Avatar
Club Car
Join Date: Sep 2011
Location: GA
Posts: 1,869
Default Re: IQ cable kit

If you are going to do it yourself, just measure the existing cables on the cart now. You don't need to upgrade the two smaller gauge wires on the motor. You will need to purchase the cable, the terminal ends, nice shrink wrap for the ends and you need a means to properly crimp them. The best are soldered.

I have not personally used Scottyb's cables but have heard time after time that they are the truth.
sunoco is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car

Thread Tools
Display Modes

Similar Threads
Thread Forum
cable getting hot Electric Club Car
Convert dual cable shifter to single cable shifter? Gas EZGO
Cable ends for #2 welding cable Lifted Golf Carts
Shift Cable or F&R Cable Adjustment Gas Yamaha
F&R single cable to dual cable? Big Block Talk!

All times are GMT -5. The time now is 08:53 PM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.