lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
Thread Tools Display Modes
Unread 01-14-2014, 01:08 PM   #1
Gone Wild
 
caokgafamily's Avatar
Club Car
 
Join Date: Oct 2008
Location: Ga
Posts: 730
Default FSIP Controller Question 3 wire

I hope everybody is doing well.

My current cart is an 03 series 48 volt with a mcor 5-0k that feeds my current controller.

If I have a mcor is it compatable with a FSIP series controller that the input is a 3 wire for a vglide?

I have looked at the FSIP info and can't really determine this? The PN for the FSIP is 51-60L 700 NNVSS2. 700amp 72 volt series controller. The low cut off is 25 volts so it should work with my 48 volt cart. But my concern is the "V" in the PN. is the 5 and V below interchangeable?

ARG 6 Accelerator Input
0 - 0 to 5K Ohms
5 - 5K to 0 Ohms
V 3-wire 5k pot,
Club Car V-Glide
S Special setting

Thanks!
Steve
caokgafamily is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 01-14-2014, 01:17 PM   #2
Gone Wild
 
caokgafamily's Avatar
Club Car
 
Join Date: Oct 2008
Location: Ga
Posts: 730
Default Re: FSIP Controller Question 3 wire

So I guess I should have asked this also.

48/72V: 25V cutout

Can a 48 Volt cart hauling butt or pulling a hard load ever get below 25V to cause this controller to cut off?

Thanks,
Steve
caokgafamily is offline   Reply With Quote
Unread 01-14-2014, 03:50 PM   #3
STEALTH 4X4
 
sunoco's Avatar
Club Car
 
Join Date: Sep 2011
Location: GA
Posts: 2,017
Default Re: FSIP Controller Question 3 wire

Stealth was using an MCOR with the controller.

96+ V-Glides are 5k-0 as well
sunoco is offline   Reply With Quote
Unread 01-17-2014, 01:09 PM   #4
Dawg Gone Wild
 
TahoeDawgZ71's Avatar
Club Car
 
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 8,008
Default Re: FSIP Controller Question 3 wire

MCOR = 3-wire. I've used this controller on several vehicles. It works great with the MCOR.
TahoeDawgZ71 is offline   Reply With Quote
Unread 01-17-2014, 01:25 PM   #5
Gone Wild
 
caokgafamily's Avatar
Club Car
 
Join Date: Oct 2008
Location: Ga
Posts: 730
Default Re: FSIP Controller Question 3 wire

Thanks David!!
caokgafamily is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
FSIP Controller Electric Club Car
FSIP controller install Electric EZGO
700 amp FSIP controller Golf Carts and Parts
FSIP OR ALLTRAX 500 amp controller Lifted Golf Carts
96 TXT Controller Wire Question Electric EZGO


All times are GMT -5. The time now is 08:07 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.