10-14-2008, 09:51 PM | #1 |
Not Yet Wild
Join Date: Oct 2008
Location: Mississippi
Posts: 51
|
controller needed
getting ready to lift my cart, i have ordered 4 gauge wiring kit(all 6ga wires will be replaced) and needing to get a controller on somekind, the buggy will have a 6" lift with 22" tires, used mainly around the yard and some hunting, I do plan on upgrading the motor later, but I am wanting to get my lift on, controller and wires done now, any suggestions on controller and from where, wanting somemore speed but also torque, right now my cart runs 12 to 14 on flat and 6 to 8mph up incline, small hill, thanks for the help--btw it is a 1999 club cart 48v v glid stock everything
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-14-2008, 10:00 PM | #2 |
Not Yet Wild
Join Date: Oct 2008
Posts: 19
|
Re: controller needed
i have a 99 also with the 3.75 hp motor and 300amp controller. i beleive i have a bad controller. is yours the multi step pot also. they say the 4 ga wires will get you 3-5 more mph. let me know what you come up with and how it does. where are you from. i move from greenville about 3.5 years ago.
scott |
10-15-2008, 08:10 AM | #3 |
Not Yet Wild
Join Date: Oct 2008
Location: Mississippi
Posts: 51
|
Re: controller needed
Not sure. I know it is a v glid, motor is a 3.10special service, I am from the Tupelo, MS area, thanks
|
10-22-2008, 10:28 PM | #4 |
Not Yet Wild
Join Date: Nov 2007
Location: mobile alabama
Posts: 11
|
Re: controller needed
I have the controller that came off my 99 club car it is stock. i replaced it last year with 11.5 hp motor cables etc. if you need it let me know.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
room needed? | Big Block Talk! | |||
g1 coils needed please | Golf Carts and Parts | |||
Needed Steering box | Golf Carts and Parts | |||
G1 help needed | Gas Yamaha | |||
needed | Golf Carts and Parts |