|
04-24-2014, 02:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 22
|
precedent cart
my cart won't move I have 50 volts at the batteries but only 40.8 volts on the light blue wire coming from the OBC. I changed the OBC but I still have only 40.8 Volts. I changed the controller and the solenoid checks out OK. What else can I do
Bernie |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-24-2014, 02:32 PM
|
#2 |
|
Gone Wild
Join Date: Aug 2013
Location: Michigan
Posts: 508
|
Re: precedent cart
Have you checked the diode and resistor on the solenoid
|
|
|
|
|
04-24-2014, 02:47 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 22
|
Re: precedent cart
this cart doesn't have a diode on it. Someone my have changed the solenoid years ago and left it off. The cart had been running and just stopped.
|
|
|
|
|
04-24-2014, 05:00 PM
|
#4 |
|
Gone Wild
Join Date: Aug 2013
Location: Michigan
Posts: 508
|
Re: precedent cart
Post a picture of the solenoid if you could.
|
|
|
|
|
04-24-2014, 09:38 PM
|
#5 |
|
revolutiongolfcars.com
 Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: precedent cart
Does the reverse buzzer turn on? Need to know for test purposes. Buzzer is irrelevant to anything, but it does prove to me that the controller is powered up. Let me know then we'll proceed to step 2.
|
|
|
|
|
04-28-2014, 06:12 AM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 22
|
Re: precedent cart
David, The buzzer may not be working. I have 48 volts between the positive battery terminal and one side of the buzzer and 21 volts on the other side
|
|
|
|
|
04-30-2014, 06:03 AM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 22
|
Re: precedent cart
David,
Can you get the info you need from these threads Bernie |
|
|
|
|
04-30-2014, 11:46 AM
|
#8 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: precedent cart
Unplug the two-pin connector from the MCOR and jump it together with a paperclip and see if it'll run.
|
|
|
|
|
04-30-2014, 01:37 PM
|
#9 |
|
Not Yet Wild
Join Date: Jun 2011
Posts: 22
|
Re: precedent cart
No Good
|
|
|
|
|
04-30-2014, 07:36 PM
|
#10 |
|
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: precedent cart
This is a possibility. When you unplugged the MCOR you may have put the paperclip on the wrong wires. If you put the paperclip into the wires on the MCOR that is wrong. If you put the paperclip into wires going back to the controller that is correct. If so carry on. Sorry to have interfered.
|
|
|
|
 |
| Tags |
| will not move |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sport Precedent Cart | On Road Golf Carts! | |||
| Precedent to series cart??? | Electric Club Car | |||
| Precedent Club Cart OBC | Electric Club Car | |||
| Precedent cart will not move | Electric Club Car | |||
| 2004 precedent cart | Electric Club Car | |||
Linear Mode
