Precedent better cables

fastbasser · 05-09-2014, 06:47 AM

Based on what I read here, my cart (2010 Precedent) runs decent for having a dealer installed high speed motor.. I am going to install (just ordered from a forum vendor) 2 gauge cables. I did notice the cables were warmer than expected when I got home the other day..

Having not swapped a set out before, (I am replacing all of them) do I need to get under the cart to do the ones running to the motor or can I reach them all from the top and back of the cart?

Thanks in advance for the info..

texan · 05-09-2014, 07:19 AM

Have to take the cover off the electrical compartment. I found it better from under it.

texan · 05-09-2014, 07:23 AM

Another thought. Be sure and flip the switch from run to tow.

fastbasser · 05-09-2014, 08:05 AM

Quote:

Originally Posted by texan

Have to take the cover off the electrical compartment. I found it better from under it.

Which cover are you referring to?

mrgolf · 05-09-2014, 08:38 AM

I find it easy to get to the motor area with the basket removed on my DS carts.

Jim C · 05-09-2014, 08:46 AM

You may already plan to, only change one at a time.

texan · 05-09-2014, 09:42 AM

Covers the controller and solenoid

TahoeDawgZ71 · 05-09-2014, 12:00 PM

Take the center two batteries out and fold the controller panel down. It's secured by one T-40 torx bolt at the top. Remove rear access door to take them loose from the motor. You don't have to get under a Precedent to do this.

fastbasser · 05-09-2014, 01:48 PM

[QUOTE=TahoeDawgZ71;1025809]Take the center two batteries out and fold the controller panel down. It's secured by one T-40 torx bolt at the top. Remove rear access door to take them loose from the motor. You don't have to get under a Precedent to do this.[/QUOTE

Thank you very much.

05-09-2014, 06:47 AM	#1
fastbasser Getting Wild Join Date: Feb 2013 Posts: 79	Precedent better cables Based on what I read here, my cart (2010 Precedent) runs decent for having a dealer installed high speed motor.. I am going to install (just ordered from a forum vendor) 2 gauge cables. I did notice the cables were warmer than expected when I got home the other day.. Having not swapped a set out before, (I am replacing all of them) do I need to get under the cart to do the ones running to the motor or can I reach them all from the top and back of the cart? Thanks in advance for the info..
fastbasser Getting Wild Join Date: Feb 2013 Posts: 79

05-09-2014, 07:19 AM	#2
texan Gone Wild Join Date: Nov 2012 Posts: 197	Re: Precedent better cables Have to take the cover off the electrical compartment. I found it better from under it.
texan Gone Wild Join Date: Nov 2012 Posts: 197

05-09-2014, 07:23 AM	#3
texan Gone Wild Join Date: Nov 2012 Posts: 197	Re: Precedent better cables Another thought. Be sure and flip the switch from run to tow.
texan Gone Wild Join Date: Nov 2012 Posts: 197

05-09-2014, 08:38 AM	#5
mrgolf Old Sky Soldier Join Date: Dec 2011 Location: Kentucky Posts: 3,881	Re: Precedent better cables I find it easy to get to the motor area with the basket removed on my DS carts.

05-09-2014, 08:46 AM	#6
Jim C Gone Wild Join Date: Oct 2008 Location: Wildwood, FL Posts: 742	Re: Precedent better cables You may already plan to, only change one at a time.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-09-2014, 09:42 AM	#7
texan Gone Wild Join Date: Nov 2012 Posts: 197	Re: Precedent better cables Covers the controller and solenoid
texan Gone Wild Join Date: Nov 2012 Posts: 197

05-09-2014, 12:00 PM	#8
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Precedent better cables Take the center two batteries out and fold the controller panel down. It's secured by one T-40 torx bolt at the top. Remove rear access door to take them loose from the motor. You don't have to get under a Precedent to do this.

05-09-2014, 01:48 PM	#9
fastbasser Getting Wild Join Date: Feb 2013 Posts: 79	Re: Precedent better cables [QUOTE=TahoeDawgZ71;1025809]Take the center two batteries out and fold the controller panel down. It's secured by one T-40 torx bolt at the top. Remove rear access door to take them loose from the motor. You don't have to get under a Precedent to do this.[/QUOTE Thank you very much.
fastbasser Getting Wild Join Date: Feb 2013 Posts: 79

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
New 2ga cables for my precedent	Electric Club Car
WTB 2G/4G cables for club car precedent/	Golf Carts and Parts
precedent brake cables rubbing	Lifted Golf Carts
Replacing cables in 2005 Precedent	Electric Club Car
Precedent 4 ga cables	Electric Club Car